UPC1251GR-9LG-E1-A Renesas

Datasheet R03DS0117EJ0100 PC1251A Rev.1.00 2017.12.25 Single Power Supply Dual Operational Amplifiers Description PC1251A is dual operational amplifiers designed for single power supply operation. Main features include low-voltage operation, a common-mode input voltage that range from V (GND) level, an output from a V (GND) level that is determined by the output stage utilizing class C push-pull circuit with 50 A(TYP.) constant current, and low current consumption. In addition, this amplifier supports both positive and negative power supply and can be used in various amplifier circuits. PC451A which is a quad type with the same circuit configuration is also available under this series of operational amplifiers. Features AEC-Q100 Compliant Input Offset Voltage 2 mV (TYP.) Input Offset Current 5 nA (TYP.) Large Signal Voltage Gain 100000 (TYP.) Internal Frequency Compensation Output Short-Circuit Protection Product Lineup Package Standard SOP TSSOP MSOP Part Name PC1251AG2 PC1251AGR PC1251AMP Outline Comparison Unit : mm Unit : mm Unit : mm 0.65 6.5 4.4 6.4 2.8 4.0 2.9 3.15 5.2 (Mounting Area Ratio) (100 %) (60 %) (34 %) The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with Renesas Electronics sales representative for availability and additional information. R03DS0117EJ0100 Rev.1.00 Page 1 of 10 2017.12.25 PC1251A Pin Configuration (Marking side) + OUT 1 8 V 1 1 2 7 I OUT I1 2 - + 2 I 3 6 I N1 I2 + - - V 4 5 I N2 EQUIVALENT CIRCUIT (1/2 Circuit) + V 100 A 6 A 6 A Q 5 Q 6 Q Q C 2 3 C I Q Q I 1 4 Q 7 R SC OUT I Q Q N 11 13 Q Q 10 12 Q Q 8 9 50 A - V ABSOLUTE MAXIMUM RATINGS (T = 25 C) A Parameter Symbol Ratings Unit Voltage between V+ + - V - V -0.3 ~ +32 V Note1 and V Differential Input Voltage VID 32 V - - Note 2 V V -0.3 ~ V +32 V Input Voltage I Note 3 - + Output applied Voltage VO V -0.3 ~ V +0.3 V Note4 P 440 mW Total Power Dissipation T Note 5 Output Short Circuit Duration tS Indefinite s T -40 ~ +125 C Operating Ambient Temperature A Storage Temperature Tstg -55 ~ +150 C Note1. Note that reverse connections of the power supply may damage the ICs 2. The input voltage is allowed to input without damage or destruction independent of the magnitude of V+. Either input signal is not allowed to go negative by more than 0.3 V. In addition, the input voltage that operates normally as an operational amplifier is within the Common Mode Input Voltage range of an electrical characteristic. 3. A range where input voltage can be applied to an output pin externally with no deterioration or damage to R03DS0117EJ0100 Rev.1.00 Page 2 of 10 2017.12.25