BD1321G-TR ROHM

Datasheet Operational Amplifier Ground Sense Low Power General Purpose Operational Amplifiers BD1321G General Description Key Specifications BD1321G is a single low voltage operational amplifier Operable supply voltage (single supply): with full swing output. It is the most effective solution for +2.7V to +5.5V applications requiring low supply current consumption Supply Current: 130A(Typ) and low voltage operation. Slew Rate: 1.0V/s(Typ) Temperature Range: -40C to +85C Input Offset Current: 5nA (Typ) Features Input Bias Current: 15nA (Typ) Operable with Low Voltage Input Ground Sense, Output Full Swing High Open Loop Voltage Gain Packages W(Typ) x D(Typ) x H(Max) Low Supply Current SSOP5 2.90mm x 2.80mm x 1.25mm Low Input Offset Voltage Applications Portable Equipment Low Voltage Application Active Filter Pin Configuration BD1321G: SSOP5 Pin No. Pin Name IN+ 1 5 VDD 1 IN+ + 2 VSS 2 VSS - 3 IN- IN-3 4 OUT 4 OUT 5 VDD Package SSOP5 BD1321G Ordering Information B D 1 3 2 1 x - T R Part Number Package Packaging and forming specification BD1321G G : SSOP5 TR: Embossed tape and reel Product structureSilicon monolithic integrated circuit This product has no designed protection against radioactive rays. www.rohm.com TSZ02201-0GMG0G200460-1-2 2014 ROHM Co., Ltd. All rights reserved. 1/19 04.Oct.2016 Rev.002 TSZ2211114001 Datasheet BD1321G Line-up Topr Package Orderable Part Number -40C to +85C SSOP5 Reel of 3000 BD1321G-TR Absolute Maximum Ratings (T =25C) A Symbol Rating Unit Parameter Supply Voltage VDD-VSS +7 V (Note 1,2) Power Dissipation P 0.67 W D Differential Input Voltage V VDD - VSS V (Note 3) ID Input Common-mode V (VSS - 0.3) to VDD + 0.3 V ICM Voltage Range (Note 4) Input Current I 10 mA I Operating Supply Voltage V +2.7 to +5.5 V opr Operating Temperature T -40 to +85 C opr Storage Temperature T -55 to +150 C stg Maximum Junction T +150 C Jmax Temperature (Note 1) To use at temperature above T =25C reduce 5.4mW. A (Note 2) Mounted on a FR4 glass epoxy PCB 70mm70mm1.6mm (Copper foil area less than 3%). (Note 3) The voltage difference between inverting input and non-inverting input is the differential input voltage. Then input terminal voltage is set to more than VSS. (Note 4) An excessive input current will flow when input voltages of more than VDD+0.6V or less than VSS-0.6V are applied. The input current can be set to less than the rated current by adding a limiting resistor. Caution: Operating the IC over the absolute maximum ratings may damage the IC. The damage can either be a short circuit between pins or an open circuit between pins and the internal circuitry. Therefore, it is important to consider circuit protection measures, such as adding a fuse, in case the IC is operated over the absolute maximum ratings. www.rohm.com TSZ02201-0GMG0G200460-1-2 2014 ROHM Co., Ltd. All rights reserved. 2/19 04.Oct.2016 Rev.002 TSZ2211115001