BU7411G-TR ROHM

Datasheet Operational Amplifiers Ultra Low Supply Current CMOS Operational Amplifiers BU7411G BU7411SG General Description Key Specifications The BU7411G is low voltage operation output full Operating Supply Voltage (single supply): swing ultra-low supply current CMOS operational +1.6V to +5.5V amplifiers. The BU7411SG has an extended operating Supply Current: 0.35A(Typ) temperature range. They have feature of low supply Temperature Range: current and low input bias current. There are suitable BU7411G -40C to +85C for battery-powered equipments and sensor amplifiers. BU7411SG -40C to +105C Input Offset Current: 1pA (Typ) Input Bias Current: 1pA (Typ) Features Ultra-low Supply Current Low Operating Supply Voltage Packages jW(Typ) x D(Typ) x H(Max) Wide Operating Temperature Range SSOP5 2.90mm x 2.80mm x 1.25mm Low Input Bias Current Applications Sensor Amplifier Consumer Equipment Battery-powered Equipment Portable Equipment Simplified Schematic VDD V bias IN+ Class OUT AB control IN- V bias VSS Figure 1. Simplified Schematic Product structureSilicon monolithic integrated circuit This product has no designed protection against radioactive rays. www.rohm.com TSZ02201-0RAR1G200310-1-2 2013 ROHM Co., Ltd. All rights reserved. 1/18 18.Sep.2013 Rev.001 TSZ2211114001 Datasheet BU7411G BU7411SG Pin Configuration BU7411G, BU7411SG: SSOP5 IN+ 1 5 VDD Pin No. Pin Name + 1 IN+ VSS 2 - 2 VSS IN-3 4 OUT 3 IN- 4 OUT 5 VDD Package SSOP5 BU7411G BU7411SG Ordering Information B U 7 4 1 1 x x - T R Part Number Package Packaging and forming specification BU7411G G: SSOP5 TR: Embossed tape and reel BU7411SG Line-up T Package Orderable Part Number opr -40C to +85C SSOP5 Reel of 3000 BU7411G-TR -40C to +105C SSOP5 Reel of 3000 BU7411SG-TR Absolute Maximum Ratings (T =25C) A Ratings Parameter Symbol Unit BU7411G BU7411SG Supply Voltage VDD - VSS +7 V (Note 1,2) Power Dissipation P 0.54 W D (Note 3) Differential Input Voltage V VDD - VSS V ID Input Common-mode V (VSS-0.3) to (VDD+0.3) V ICM Voltage Range (Note 4) Input Current I 10 mA I Operating Supply Voltage V +1.6 to +5.5 V opr Operating Temperature T - 40 to +85 - 40 to +105 C opr Storage Temperature T - 55 to +125 C stg Maximum T +125 C Jmax Junction Temperature (Note 1) To use at temperature above T =25C reduce 5.4mW/C. A (Note 2) Mounted on a FR4 glass epoxy PCB70mm70mm1.6mm (copper foil area less than 3%). (Note 3) The voltage difference between inverting input and non-inverting input is the differential input voltage. Then input terminal voltage is set to more than VSS. (Note 4) An excessive input current will flow when input voltages of more than VDD+0.6V or less than VSS-0.6V are applied. The input current can be set to less than the rated current by adding a limiting resistor. Caution: Operating the IC over the absolute maximum ratings may damage the IC. The damage can either be a short circuit between pins or an open circuit between pins and the internal circuitry. Therefore, it is important to consider circuit protection measures, such as adding a fuse, in case the IC is operated over the absolute maximum ratings. www.rohm.com TSZ02201-0RAR1G200310-1-2 2013 ROHM Co., Ltd. All rights reserved. 2/18 18.Sep.2013 Rev.001 TSZ2211115001