H7 RSB27V Diodes Bi-Directional Zener Diodes RSB27V z Dimensions (Unit : mm) z Outline RSB27V is a bi-directional zener diode having two zeners confronted in one package, aimed to absorb the +0.2 1.25 0.1 0.7 -0.1 surge in plus and minus directions arising from the signal line in mobile phone, consumer electronics such as PC, and automotive applications. In general, two pieces of zener diodes are used as ESD protector to absorb the surge in +/ - directions. Paying attention to this point and using its original technology, ROHM succeeded to incorporate 2 zeners in one die / +0.1 0.1 0.3 0.05 -0.05 package for benefit of space-saving on the circuit board. z Features 1) Absorption of plus & minus surge with one package. z Structure 2) Decrease of components and space-saving on the circuit board. z Absolute maximum ratings (Ta=25C) Parameter Limits Symbol Unit Power dissipation 200 Pd mW Junction temperature Tj 150 Operation temperature range -55 to +150 Tstg z Electrical characteristics (Ta=25C) Parameter Conditions Symbol Min. Max. Unit Zener voltage V 26.2 32.0 V I =1mA z F Reverse current I -0.1 A V =24V R R Capacitance between terminals V =0V , f=1MHz Ct - 30 pF R Zener voltage to be measured at 40ms after current starting to apply. 1/1 1.7 0.1 2.5 0.2Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party s intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer s right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. THE AMERICAS / EUROPE / ASIA / JAPAN ROHM Customer Support System Contact us : webmaster rohm.co.jp www.rohm.com TEL : +81-75-311-2121 Copyright 2008 ROHM CO.,LTD. 21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan FAX : +81-75-315-0172 Appendix1-Rev2.0