F-217 (Rev 17MAR17) EPLSP0192000 (0.80 mm) .0315 EPLSP SERIES RUGGED LATCHING HIGH-SPEED SYSTEM Low profile latching Mates with: FEATURES ERI8 Rugged external cable 32 AWG Low Small form factor Skew Low profile latching Pair Metal-to-metal two-piece APPLICATION contact system High mating cycles High cable flex life ERC0190102 (500 cycles 180 bend) Small bend radius ERI8019SDRA EPLSP SPECIFICATIONS Cable Length* Rated 7 dB Insertion Loss For complete specifications see www.samtec.com EPLSP 1 meter (39.4 ) 21 Gbps Cable: High 3 meters (118 ) 9.5 Gbps 32 AWG Low Skew Pair/ cycles Longer cables and better performance 28 AWG Power available. See EPLSP-E Series Bend Radius: Metal-to-metal (25.40 mm) 1.00 Performance and complete test data Signal Routing: contact interface EPLSP0191000 available at www.samtec.com EPLSP 100 W Differential or contact sig samtec.com Pinout Map: 1:1 Map Standard (See web address above for additional information) NO. OF Operating Temp Range: LENGTH TYPE POSITIONS -20 C to +105 C Current Rating: 1.7 A per pin (1 pin powered per row) RoHS Compliant: Yes 019 XXXX = 9 Pairs, 5 Power, 19 positions = Length in millimeters EPLSP PROTOCOLS 1000, 2000, 3000 = Eye Speed I/O Cable 031 (Standard lengths) SAS = 17 Pairs, 5 Power, 31 positions SATA ALSO AVAILABLE Fibre Channel (MOQ Required) Ethernet PCIe NO. OF POSITIONS A Other lengths InfiniBand (23.85) .939 019 Contact Samtec. (32.95) 1.30 031 OTHER (50.40) 1.984 (7.57) SOLUTIONS .298 A End 2 reversed to show bottom view (8.79) .346 IP68 Sealed System (RCH/RPBH Series). For more information, see www.samtec.com RCH and www.samtec.com RPBH. (6.00) .236 LENGTH Note: This Series is non-standard, non-returnable. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtecs specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.F-217 (Rev 17MAR17) EPLSP-E0311000 (0.80 mm) .0315 EPLSP-E SERIES RUGGED LATCHING HIGH-SPEED SYSTEM RUGGED LATCHING HIGH-SPEED SYSTEM 32 AWG Low Skew Pair Mates with: SPECIFICATIONS ERI8 For complete specifications see 32 AWG www.samtec.com EPLSP-E Low Cable: Skew 32 AWG Low Skew Pair/ Pair 28 AWG Power Bend Radius: Performance Comparisons (25.40 mm) 1.00 Signal Routing: Data Rate EPLSP EPLSP-E 100 W Differential Pinout Map: 14 Gbps 2 m (80 ) 2.8 m (112 ) + 40% 1:1 Map Standard (See web address above 28 Gbps N/A 0.5 m (20 ) N/A for additional information) Passive Equalization Operating Temp Range: Cable Length EPLSP EPLSP-E for improved -20 C to +105 C performance RoHS Compliant: 1 meter (39.4 ) 21 Gbps 25.5 Gbps + 20% Yes 3 meters (118 ) 9.5 Gbps 13 Gbps + 37% Rated at 7 dB insertion loss Performance and complete test data available at www.samtec.com EPLSP-E or contact sig samtec.com NO. OF LENGTH TYPE POSITIONS 019 XXXX = 9 Pairs, 5 Power, 19 positions = Length in millimeters EPLSP-E 1000, 2000, 3000 = Equalized 031 (Standard lengths) Eye Speed I/O Cable = 17 Pairs, 5 Power, 31 positions APPLICATION NO. OF ALSO AVAILABLE A N N+1 Nx2 POSITIONS (MOQ Required) (70.00 mm) 019 (23.85) .939 19 20 38 Other lengths 2.76 (32.95) 1.30 31 32 62 031 Contact Samtec. (50.40) 1.984 (7.57) Bend Radius .298 (25.40 mm) 1.00 A End 2 reversed to show bottom view (8.79) .346 (6.00) .236 LENGTH Note: This Series is non-standard, non-returnable. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtecs specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.