ESQT-110-02-G-D-720 Samtec

FLEXIBLE ELEVATED & SELF-NESTING SOCKETS (2.00 mm) .0787 PITCH ESQT/ESQT (-368)/PTHF SERIES ESQT NO. PINS LEAD PLATING ROW BODY OTHER 1 Board Mates: ESQT - PER ROW - STYLE - OPTION - OPTION - HEIGHT - OPTION TMMH, TMM, MTMM, MMT, TW, LTMM, ZLTMM, ESQT, PTT, TSH, TMMS Specify 02 thru 50 F S XXX XXX LEAD Cable Mates: = Gold flash on contact, = Single Row = Body Height = Polarized STYLE Matte Tin on tail (in inches) Position TCMD (Indicate from D (7.87 mm) .310 position chart L = Double Row minimum for number) = 10 (0.25 m) S, D, Q SPECIFICATIONS Gold on contact, T Matte Tin on tail = Triple Row (9.53 mm) .375 Insulator Material: minimum for No. of positions x Black Liquid Crystal Polymer No. of positions x M Q T, 5, 6 (2.00) .0787 + (0.30) .012 Contact Material: (2.00) .0787 + (0.30) .012 = 20 (0.51 m) = Quad Row Phosphor Bronze Gold on contact, No. of Plating: No. of Matte Tin on tail rows 5 Sn or Au over rows x x = Five Row 50 (1.27 m) Ni GF (2.00) (2.00) Current Rating (ESQT/TMMH): = 15 (0.38 m) .0787 .0787 4.5 A per pin 6 Gold on contact, (2 pins powered) = Six Row Gold flash on tail Operating Temp Range: (Recommended -55 C to +125 C for self-nesting) Insertion Depth: (02 lead style only) (6.35) (6.35) (2.62 mm) .103 to .250 .250 (5.03 mm) .198 with TAIL (0.38 mm) .015 wipe LEAD MAX MAX BODYTAIL BODY BODY A (1.27) Max Cycles: STYLE TAIL HEIGHT(1.27) A HEIGHT A HEIGHT .050 .050 100 with 10 (0.25 m) Au (21.59) (13.72) (20.32) MIN 02 MIN LeadFree Solderable: .850 .540 .800 Yes, for -S, -D & -Q (11.63) (3.76) (10.36) (Wave only for -T, -5 & -6) 03 .458 .148 .408 ESQT (-368)/PTHF NO. PINS LEAD PLATING SERIES 1 Q 368 Mates: - - - - - PER ROW STYLE OPTION ESQT, PTHF Specify ESQT 30 GF SPECIFICATIONS LEAD = Solder Tails = 15 (0.38 m) STYLE Gold on contact, Insulator Material: Gold flash on tail from PTHF Black Liquid Crystal (02 Lead Style only) = Press-fit Tails chart Polymer (ESQT-368) Black High Temp M Nylon (PTHF) = 20 (0.51 m) Contact Material: Gold on contact, Phosphor Bronze ESQT PTHF LEAD Matte Tin on tail Plating: STYLE (03 Lead Style only) Au or Sn over A B A B 50 (1.27 m) Ni (21.59) (12.24) (21.59) (12.24) 02 Operating Temp Range: .850 .482 .850 .482 -55 C to +125 C (11.63) (2.29) (12.34) (3.00) (8.00) Normal Force: 03 .458 .090 .486 .118 .315 60 grams (0.59 N) average Max Cycles: 100 with 10 (0.25 m) Au (60.30) 2.374 LeadFree Solderable: Yes (ESQT-368) (6.35) .250 (9.35) .368 A TOOLING A Press-Fit CAT-PT-PT-130-A-4 For more information, visit B B www.samtec.com/tooling Note: This Series is non-standard, non-returnable. ESQT (368) SERIES PTHF SERIES F-221 (Rev 28APR21) samtec.com ESQT or samtec.com PTHF Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Headers & Wire Housings category: Click to view products by Samtec manufacturer: Other Similar products are found below : 892-18-020-10-001101 58102-G61-06LF 582553-1 0009485154 009176003701906 0050291907 LY20-4P-DT1-P1E-BR 02.125.8002.8 609-3404 61062-3 61082-181009 622-3653LF 63453-116 636-1030 636-1427 636-3427 636-4007 641938-9 641991-4 644827-2 65817- 010LF 65817-015LF 65863-015LF 66207-023LF 67095-007LF 67601157 68645-018 68648-049 70.362.1628.0 70-4210 70-4226B 70- 4853B 707-5020 707-5028 71.350.2428.0 71918-208LF 71961-016LF 733-134 733-162 754199-000 760-3052 787-8014-00 79531-3000 FCN-360C032-B FCN-367T-T012/H FCN-723D010/2 80.063.4001.1 800-90-001-10-001000 800-90-010-10-002000 801-43-002-10-013000