F-214 IDMD24S12.00G (2,54 mm) .100 SLIM BODY FLAT RIBBON IDC CABLES Mates with: SPECIFICATIONS TYPE ROW NO. PINS END TSW, MTSW, TSM, EJH, STRIP OPTION PER ROW AS SEM BLY For complete speci cations PHT, HMTSW, HTSW, see www.samtec.com IDSS, HW, DW, EW, ZW, MTLW www.samtec.com IDSD, www.samtec.com IDMS or IDSD Mates with: Single www.samtec.com IDMD TST, HTST, ZST, S = S End Insulator Material: = Single BST, EJH Black Glass Filled Polyester Plating: Au over 50 (1,27 m) Ni or D Sn over 100 (2,54 m) Cu = Double or 50 (1,27 m) Ni (Color coded Wire: IDM cable N/A for 28 AWG 7/36 stranded = Standard Tail Male Plug Tinned Copper 31 thru 36 Temperature Range: Socket or Male Plug on one end pins/row. -20C to +105C See G IDS (Rainbow Cable) option.) = Socket Double -40C to +105C = D End (Gray Cable) Contact IDSS/IDSD): BeCu Terminal (IDMS/IDMD): Phosphor Bronze Current Rating (IDSD/TST): 02 thru 32 3.4 A per pin (1 position powered per row) Current Rating (IDMD): DOUBLE 3 A per pin Full size (64 positions): IDMD IDMS (82,55) 3.250 (1 position powered per row) Less than 64 positions: (Double) Contact Resistance: (Single) No. Positions/row X (2,54) .100 + (1,68) .066 15 m Socket or Male Plug on each end SINGLE Lead Size Range: Full size (32 positions): (0,56 mm) .022 SQ to (81,53) 3.210 Less than 32 positions: (0,71 mm) .028 SQ (2,54) (5,08) Transfer = No. Positions/row X (2,54) .100 + (0,71) .028 .100 .200 T Lead Insertion Depth: End (5,59 mm) .220 to (6,22 mm) .245 (6,10) .240 Insertion Force: MAX (Single contact only) 4 oz (1,11 N) avg. (0,48) ((0,64 mm) .025 SQ probe) (3,18) .019 .125 Withdrawal Force: (Single contact only) (0,46) (2,54) Male Plug on one end with socket on (2,54) .100 3 oz (0,83 N) avg018 .100 other. Begin part number with IDM. x ((0,64 mm) .025 SQ probe) (0,48) RoHS Compliant: .019 (For square or long tail see HCMX Series) Yes OTHER SOLUTIONS RECOGNITIONS 02 thru 36 For complete scope Molded-To-Position of recognitions see www.samtec.com/quality IDC Assemblies DOUBLE Full size (72 positions): Low Pro le (92,71) 3.650 Less than 72 positions: Skinny side locks IDSD IDSS No. Positions/row x (2,54) .100 + (1,50) .059 Dual beam contacts (Double) (Single) SINGLE Full size (36 positions): Single and double row (91,69) 3.610 (3,05 mm) .120 Less than 36 positions: (5,08) No. Positions/row x (2,54) .100 + (0,48) .019 .200 and (5,84 mm) .230 length tail available (9,27) Call .365 REF Samtec for HCXX Series. (0,76) (2,54) (2,54) .030 .100 Note: .100 SQ This Series is non-standard, non-returnable. WWW.SAMTEC.COMIDSD05D04.25S02 IDSD24S05.00 IDSS, IDSD, IDMS, IDMD SERIES EJECTOR HEADERS ASSEMBLED OPTION & LOCKING CLIPS LENGTH IDSS or IDSD STRIP ASSEMBLY Ejector headers Locking clips XX.XX POLARIZING KEY LOCKING = Assembled Length CLIP .025 SQ (0,64) .025 Optional polarizing key for TERMINAL SQ PC use with IDSS & IDSD STRIP (TSW) Assembled Length in BOARD 1 (5,84) INCHES ( /8 ) Series. Also polarizes .230 (2 inches minimum) SSW, SSQ, ESW & ESQ Series. Black High See TSW Series. Temperature Ther mo plas tic Order: Part Number PK-01-06 See EJH Series. (Available in wheels of six each) Tin Plating = T (Both ends) ST X S XX RR = Stripped & Tinned = Daisy Chain Single = Re= Reverversedsed Tin IDM Specify Suf x from table. 2 10 (0,25 m) Gold IDS 1 C = XX 8 min. All dimensions are 1/16 . Single Row (-T End Assembly Required) Not available in 28 positions and higher. Connectors (IDSS) 10 (0,25 m) Gold IDM A = Tin IDS (-T End Assembly Required) Outer Most Standard plating is selective 4 minimum gold over BeCu contact for IDS When mating double row Selective gold over phosphor 8 connector with two single row bronze for IDM. 1 1/8 (3,18) ST8 connectors, the outer most 1/4 (6,35) ST4 single will be connected to M 1/2 (12,70) = Middle Reversed P XX ST2 Conductor 1 and the inside =Polarized 3/8 (9,53) ST3 single to Conductor 2. 4 7 72 04 02 D XX B XX = Daisy Chain, Double = Breakout 2 1 XX 8 71 03 01 min. Specify XX as number of Double Row conductors to be broken out. Specify XX as position. For Connectors Requires SXX, WXX or DXX (IDSD or Double the same position will IDMD) 8 be polarized on both ends. (Not available on IDM or EDM, Outer Most unless transfer, then only the O XX socket is polarized.) 2 = Outside Reversed 4 minimum 7 5 max. G 2 min. = Gray Cable W XX Breakout starts with Number 1 = Wiring Reversed lead indicated by brown wire or Specify G for Gray cable. Gray Daisy Chain, Single red stripe. Shown on top side. 5 cable has one red edge. IDSS and IDMS uses .100 centerline Same as S XX except outer RW cable. IDSD and IDMD uses strip connected to Conductor = Reversed Wiring .050 centerline cable. Cable is 2 and inside strip connected 28 AWG 7/36 copper wire. to Conductor 1. Requires SXX, WXX or DXX Standard cable is same as 1 wire opposite position 1. above except color coded. 3 6 7 8 WWW.SAMTEC.COM