REVISION DO
TSW-XXX-XX-XXX-X-XX-XXX
OPTION #2
TERMINAL SPACE SPEC.
-POLARIZING SPECIFICATION
DO NOT (SEE ASSEMBLY INSTRUCTIONS) XXX INDICATES POS. TO BE OMITTED (SEE FIG 3)
-1=.100[2.54] FILL EVERY POSITION
SCALE FROM
OPTION #1
THIS PRINT -2= .200[5.08] FILL EVERY OTHER POS.
-BLANK= STRAIGHT
STARTING W/ 1ST & ENDING
-RA= RIGHT ANGLE (SEE TABLE 3 & 5, FIG 5)
W/ LAST POS. IN BODY)
-RE= EXTENDED RIGHT ANGLE (SEE TABLE 3 & 5, FIG 5)(SINGLE ROW ONLY)
-NA= RA OPTION WITH STRAIGHT OPTION BODY
BODY LENGTH SPEC.
-NE= RE OPTION WITH STRAIGHT OPTION BODY
EXPRESSED IN # OF POS
-LC= LOCKING CLIP (USE LTC-01 FOR -S ROW AND
-1: -01 THRU -50 (-S, -D, -T)
LTC-02 FOR -D ROW)(STYLES 08 THRU 13 & 22 ONLY) (SEE FIG 2) = NO. OF POS. x .100[2.54]
(N/A IN -RA OR -RE OPTION AND/OR LESS THAN 4 POSITIONS)
-2: -02 THRU -25 (-S, -D, -T)
(N/A IN -T OR -Q) = NO OF POS. x .200[5.08] - .100[2.54]
-LA= -RA OPTION WITH -LL OPTION (SEE FIG 5)
-LL= LOCKING LEAD (SEE FIG 4)
TERMINAL SPECIFICATION (N/A WITH -RE OR -NE OPTION)
SEE TABLE 1 (N/A IN SINGLE ROW, 1 OR 2 POSITIONS)
ROW SPECIFICATION (SEE TABLE 2)
PLATING SPECIFICATION
-S: SINGLE
-G: 10" GOLD IN CONTACT AREA, 3" GOLD ON TAIL
-D: DOUBLE
-T: MATTE TIN CONTACT AND TAIL
-T: TRIPLE
-S: 30" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL
-Q: TRIPLE ROW, FILL OUTER ROWS ONLY
-H: 30" HEAVY GOLD IN CONTACT AREA, 3" GOLD ON TAIL
-L: 10" LIGHT SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL
-F: 3" FLASH SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL
-E: 50" EXTRA HEAVY GOLD IN CONTACT AREA, 3" GOLD ON TAIL
(-07, -13, -14, -15, -20, -21 ONLY)
-TL: TIN/LEAD (90/10 +/-5%) CONTACT AND TAIL
(AVAILABLE ONLY ON LEAD STYLES -07, -08 & -09)
-STL: 30" SELECTIVE GOLD IN CONTACT AREA, TIN/LEAD (90/10 +/-5%) TAIL
(AVAILABLE ONLY ON LEAD STYLES -07, -08, -10, -15, -16, -17, -21, -23 & -24
THROUGH HOLE ONLY)
-TM: MATTE TIN CONTACT AND TAIL
-SM: 30" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL
-LM: 10" LIGHT SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL
-FM: 3" FLASH SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL
-SS: 30" STRIPE SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL (SEE NOTE 13)
NOTES:
1. C REPRESENTS CRITICAL DIMENSION.
2. MINIMUM TERMINAL PUSHOUT: 3 LBS.
C 3. MAXIMUM HEIGHT VARIATION: .005 [.13](R.A. TAIL N/A).
4. ASSEMBLE GOLD PLATE END AS SHOWN.
5. STYLE -26: ROUND END TO APPEAR ON BOTTOM.
PROPRIETARY NOTE
* *
UNLESS OTHERWISE SPECIFIED,
.005[0.13]
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
6. 'C' FOR STYLE -08, OPTION -LA & -RA ONLY.
.008[0.20] DIMENSIONS ARE IN INCHES.
PROPRIETARY INFORMATION AND ALL DESIGN,
7. TOW & SWAY SPEC. OF 2 APPLIES TO ALL
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
TOLERANCES ARE:
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
POSITIONS, POST & TAIL, IN ALL DIRECTIONS.
DECIMALS ANGLES
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
8. ALL DIMENSIONS TO BE ABOUT CL WITHIN .005 [.13].
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
.XX: .01[0.3] 2
520 PARK EAST BLVD, NEW ALBANY, IN 47150
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
9. MEASURE FROM THE BEND RADIUS OF THE TERMINALS . .XXX: .005[0.13]
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS PHONE: 812-944-6733 FAX: 812-948-5047
.XXXX: .0020[0.051]
10. TSW-50-D BODY CAN BE USED IF RTSW-50-D IS UNAVAILABLE WRITTEN CONSENT OF SAMTEC, INC.
e-Mail [email protected] code 55322
C
11. ORIENTATE PINS TO PREVENT BANDOLIER MARKS FROM SHOWING
MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 3:1
DESCRIPTION:
IN THE POST AREA. (SEE TABLE 7)
BODIES: DUPONT PBT, UL 94 VO, COLOR: BLACK .025[0.64] SQ. POST TERMINAL STRIP ASSEMBLY
12. MAXIMUM CUT FLASH: .020 [.50]
TERMINALS: PHOS BRONZE
DWG. NO.
13. -SS OPTION ONLY AVAILABLE IN STRAIGHT LEAD STYLES -07, -08 &
-09, -RA STYLE -08 ONLY. CAN ONLY MATE WITH SSW, SSQ, SSM,
TSW-XXX-XX-XXX-X-XX-XXX
ESW, ESQ AND BCS.
SHEET OF
BY: KOLB 08/24/1988 1 6
C:\EnterpriseVault\DWG\MISC\MKTG\TSW-XXX-XX-XXX-X-XX-XXX-MKT.SLDDRWREVISION DO
C
SEE TABLE 8
(SEE CALLOUT)
-1XX=.100[2.54]
C
-2XX=.200[5.08].008[0.20]
.100 2.54
.200 5.08 .200 5.08
(SEE TABLE 1, SHT 6)
2 MAX SWAY
(SEE NOTE 3 AND 6)
2 MAX SWAY
(EITHER DIRECTION) .100 2.54
(EITHER DIRECTION)
.100 2.54
(SEE TABLE 4, SHT 5)
REF
.100 2.54
REF
.200 5.08 .300 7.62 .300 7.62
SEE NOTE 5 2 MAX SWAY
2 MAX SWAY
REF REF REF
(EITHER DIRECTION)
(EITHER DIRECTION)
FIG 1
-S -D -T -Q
(TSW-1XX-XX-XX-S SHOWN) REF
.596 15.15
REF
PROPRIETARY NOTE
* *
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
520 PARK EAST BLVD, NEW ALBANY, IN 47150
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
PHONE: 812-944-6733 FAX: 812-948-5047
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
e-Mail [email protected] code 55322
WRITTEN CONSENT OF SAMTEC, INC.
DESCRIPTION:
DO NOT SCALE DRAWING
.025[0.64] SQ. POST TERMINAL STRIP ASSEMBLY
DWG. NO.
SHEET SCALE: 3:1
FIG 2
TSW-XXX-XX-XXX-X-XX-XXX
(TSW-1XX-XX-XX-S-LC SHOWN)
(SAME AS FIG 1, DIFFERENT AS SHOWN)
C:\EnterpriseVault\DWG\MISC\MKTG\TSW-XXX-XX-XXX-X-XX-XXX-MKT.SLDDRW SHEET OF
BY: KOLB 08/24/1988 2 6