CHIP TYPES SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS Chip type, Low Impedance, High CV Series CK Solvent Proof Low Impedance Chip type, low impedance temperature range up to 105 C Designed for surface mounting on high density PC board Applicable to automatic insertion machine using carrier tape Complied to the RoHS directive Item Characteristics Operating temperature range -55 ~ +105 C Leakage current max. I = 0.01CV or 3 A whichever is greater (after 2 minutes) Capacitance tolerance 20% at 120Hz, 20 C WV 6.3 10 16 25 35 50 63 80 100 Dissipation factor max. (at 120Hz, 20 C) tan 0.24 0.19 0.16 0.14 0.12 0.12 0.10 0.10 0.10 WV 6.3 10 16 25 35 50 63~100 Low temperature characteristics Z-25 C/Z+20 C 2 2 2 2 2 2 3 (Impedance ratio at 120Hz) Z-55 C/Z+20 C 3 3 3 3 3 3 4 Leakage current Less than specified value Load life (after application of the rated Capacitance change Within 25% of initial value voltage for 2000 hours at 105 C) tan Less than 200% of specified value After 1000 hours no load test, leakage current, capacitance and tan are same as load life value. Shelf life (at 105 C) The measurement shall be performed at 20 C by the KS C IEC 60384 - 4 The following specifications shall be satisfied when the capacitors are restored to 20 C after exposing them at 250 C for 10 seconds. Resistance to soldering heat Leakage current Less than specified value Capacitance change Within 10% of initial value tan Less than specified value Unit : mm DRAWING -Series code of CK is K 6.3 8 6.2) DL A B C E R 6.35.8 2.4 6.6 6.6 2.2 0.5~0.8 6.37.7 2.4 6.6 6.6 2.2 0.5~0.8 86.2 3.3 8.3 8.3 2.3 0.5~0.8 810 2.9 8.3 8.3 3.1 0.8~1.1 1010 3.2 10.3 10.3 4.5 0.8~1.1 12.5 13.5 4.6 12.8 12.8 4.5 0.8~1.4 Voltage mark for 6.3V is 6 8 10, 10 10) 12.513.5) 69 K K SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS CK series DIMENSIONS & MAXIMUM PERMISSIBLE RIPPLE CURRENT WV 6.3 10 16 25 35 50 F 10 1.0 165 6.35.8 15 1.0 165 6.35.8 22 6.35.8 1.0 165 6.37.7 0.68 280 33 6.35.8 0.44 230 6.35.8 0.44 230 6.35.8 0.44 230 0.63 300 86.2 0.68 280 6.37.7 47 6.35.8 0.44 230 6.35.8 0.44 230 6.35.8 0.44 230 6.35.8 0.44 230 86.2 0.63 300 6.37.7 0.34 280 68 6.35.8 0.44 230 6.35.8 0.44 230 6.35.8 0.44 230 6.35.8 0.44 230 810 0.34 450 86.2 0.26 300 6.37.7 0.34 280 100 6.35.8 0.44 230 6.35.8 0.44 230 6.35.8 0.44 230 0.18 670 810 0.17 450 1010 86.2 0.26 300 6.37.7 0.34 280 150 6.35.8 0.44 230 6.35.8 0.44 230 810 810 0.17 450 0.17 450 86.2 0.26 300 6.37.7 0.34 280 6.37.7 0.34 280 220 6.35.8 0.44 230 1010 810 0.17 450 0.09 670 86.2 0.26 300 86.2 0.26 300 6.37.7 0.34 280 330 810 0.17 450 810 0.17 450 10 10 0.15 670 86.2 0.26 300 470 810 0.17 450 810 0.17 450 1010 0.09 670 810 0.17 450 680 1010 0.09 670 1000 10 10 0.09 670 1500 1010 0.09 670 WV 63 80 100 F 10 6.35.8 2.8 80 6.37.7 2.4 60 22 6.37.7 2.1 120 810 1.3 130 810 1.3 130 33 810 0.9 250 810 1.3 130 1010 1.2 200 47 0.9 250 1.2 200 12.513.5 0.8 500 810 10 10 68 0.5 400 0.8 500 12.513.5 0.8 500 1010 12.5 13.5 100 0.5 400 0.8 500 1010 12.5 13.5 150 0.8 500 12.513.5 0.32 800 12.5 13.5 220 12.513.5 0.32 800 Ripple current (mA rms) at 105 C, 100kHz Impedance () at 20 C, 100kHz Case size D X L (mm) FREQUENCY COEFFICIENT OF PERMISSIBLE RIPPLE CURRENT Frequency 50Hz 120Hz 300Hz 1kHz 10kHz Coefficient 0.35 0.5 0.64 0.83 1.00 70