F1857CCD1200

Power Modules DataSheet F18 Series Industry Standard Package and Circuits Power Control Building Blocks 10 Circuits to Choose from UL Recognized E72445 AVAILABLE OPTIONS Circuit Type CAD CCH HD RD CAH D SD CCD DH SDK Series F18 92 SD 1200 Operating Voltage Load Current 1200: 480 VAC 400: 120 VAC 27: 25 Amps 92: 90 Amps 1400: 530 VAC 600: 240 VAC 42: 40 Amps 107: 105 Amps 1000: 380 VAC 1600: 600 VAC 57: 55 Amps Required for valid part number For options only and not required for valid part number Note: Not all combinations available ELECTRICAL SPECIFICATIONS 57 Symbol 27 42 92 107(2) Maximum DC Output Current (Tc = 85C) I 40 A 105 A 25 A 55 A 90 A D Maximum Voltage Drop Amps Peak V 1.55V 75 A 1.4V 120 A 1.40V 270 A 1.65V 300 A 1.4V 165 A F Operating Junction Temperature Range T -40 -125 C -40 - 125C -40 - 125C -40 - 125C -40 - 125C J Critical Rate of Rise of On-State Current TJ=125C A/s di/dt 100 100 100 100 100 Critical Rate of Rise of Off-State Voltage V/s dv/dt 1000 1000 1000 1000 1000 400 (120 VAC) 600 (240 VAC) V Repetitive Peak Reverse Voltage (AC Line Nominal) Vpk 800 (280 VAC) RRM 1200 (480 VAC) 1400 (530 VAC) 1600 (600 VAC) I Maximum Non-Repetitive Surge Current (1/2 Cycle, 60 Hz) A TSM 400 1000 1500 1950 2250 2 4150 9350 15800 Maximum IT for Fusing (t=8.3ms) Asec I T 670 25000 I Maximum Required Gate Current to Trigger 25C mA 150 150 150 GT 150 150 Maximum Required Gate Voltage to Trigger 25C V V 3.0 3.0 3.0 3.0 3.0 GT P Average Gate Power W G(AV) 0.5 0.5 0.5 0.5 0.5 V Maximum Peak Reverse Gate Voltage V 5.0 5.0 5.0 5.0 5.0 GM Maximum Thermal Resistance, Junction to Ceramic Base per Chip C/W R 0.28 0.4 0.25 0.14 0.135 JC V 2500 2500 2500 Isolation Voltage Vrms ISOL 2500 2500 GENERAL SPECIFICATIONS Description Parameters Weight (typical) 4.75 oz (135g) Torque Required Terminal Stud Screw : 30 in. lbs. Mounting Screws : 20 in. lbs. GENERAL NOTES (1) All parameters at 25C and per section unless otherwise specied. (2) Available only in SD and SDK circuit conguration. Do not forget to visit us at: www.crydom.com Copyright 2018 Crydom Inc. Specifications subject to change without notice.Power Modules DataSheet CIRCUIT DIAGRAMS G2 G2 K2 1 K2 CCH 2 3 RD DH AC + - AC + - G2 G2 K2 + - AC K2 1 2 3 AC + - 1 2 3 CAH CCD HD AC + - K1 1 2 3 G1 K1 G1 1 2 3 AC - + - 1 3 2 - K1 K1 G1 G1 1 2 3 CAD G2 1 2 3 K2 K2 AC + - K1 G2 AC + - K1 SDK SD G1 G1 G2 K2 K2 G2 AC + - AC - + + - K1 D K1 G1 G1 + - MECHANICAL SPECIFICATIONS Tolerances: 0.02 in / 0.5 mm All dimensions are in: inches millimeters .244 (6.2) DIA787 .787 .550 .590 (20.0) (20.0) (14.0) (15.0) .500 .787 12.7 20.0 3.150 .393 (79.9) 10.0 .110 X .036 M5 SCREW FASTON TERMINALS 3 PLCS 1.195 1.180 30.3 29.9 3.620 (91.9) .12 (3.0) Agency Approvals E72445 Rev. 012518 ECN 20400 Do not forget to visit us at: www.crydom.com Copyright 2018 Crydom Inc. Specifications subject to change without notice.