HS151DR Series Assemblies 40 amp AC output 40C Single or Dual Channel output 3 to 32 VDC input control voltage DIN Rail mounted uL, CSA, VDE, CE approved SSRs PRODUCT SELECTION Description 40 A 40 A 40 A 3-32 VDC Control HS151DR-D2450 HS151DR-HD6050 HS151DR-CC2450W3U OUTPUT SPECIFICATIONS (1) Description HS151DR-D2450 HS151DR-HD6050 HS151DR-CC2450W3U Operating Voltage (47-63Hz) Vrms 24-280 48-660 24-280 Transient Overvoltage Vpk 600 1200 600 Maximum Off-State Leakage Current Rated Voltage mArms 10 10 0.1 Minimum Off-State dv/dt Maximum Rated Voltage V/sec (2) 500 500 500 Maximum Load Current Arms 40 40 40 Minimum Load Current Arms 0.04 0.04 0.15 Maximum Surge Current (16.6ms) Apk 625 625 750 Maximum On-State Voltage Drop Rated Current Vpk 1.6 1.7 1.3 Maximum It for Fusing (8.3 msec) A sec 1620 1620 2320 Minimum Power Factor (with Maximum Load) 0.5 0.5 0.5 INPUT SPECIFICATIONS (1) Description HS151DR-D2450 HS151DR-HD6050 HS151DR-CC2450W3U Control Voltage Range 3-32 VDC 3-32 VDC 4-32 VDC Minimum Turn-On Voltage 3.0 VDC 3.0 VDC 4.0 VDC Minimum Turn-Off Voltage 1.0 VDC 1.0 VDC 1.0 VDC Maximum Reverse Voltage 32 VDC 32 VDC 32 VDC Typical Input Current 3.4 mA 5 VDC 2.0 mA (3) 10 mA 12 VDC Nominal Input Impeadance 1500 Ohms (3) (3) Maximum Turn-On Time msec 1/2 Cycle 1/2 Cycle 1/2 Cycle Maximum Turn-Off Time msec 1/2 Cycle 1/2 Cycle 1/2 Cycle GENERAL SPECIFICATIONS Description HS151DR-Dxx50 HS151DR-CC2450W3U Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms 4000 Vrms 9 9 Minimum Insulation Resistance ( 500 V DC) 10 Ohms 10 Ohms Maximum Capacitance, Input/Output 8 pF 10 pF Ambient Operating Temperature Range -40 to 80C -40 to 80C Ambient Storage Temperature Range -40 to 125C -40 to 125C Status Indicator Display None Yes Weight (typical) 1.11 lb. (437g) 1.17 lb (450g) Encapsulation Themally Conductive Epoxy Themally Conductive Epoxy Recommended Terminal Screw Torque Range: 6-32 Screws - 10 in/lbs. 8-32 Screws - 20 in/lbs. 8-32 Screws - 20 in/lbs. (Screws dry without (Screws dry without grease) grease) Thermal pad installed Yes Yes GENERAL NOTES 1) All parameters at 25C unless otherwise specified. 2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 3) Input circuitry for DC control version incorporates active current limiter (HD and Dual model only) MECHANICAL SPECIFICATIONS THERMAL DERATE INFORMATION AGENCY APPROVALS Agency approvals are for relay only. E116949 (D2450) E116950 (HD6050, CC2425W3U) LR81689 (D2450, HD6050) 10143 UG (D2450, HD6050) Rev. 110811