MP120D4 Sensata

PCB Mount DataSheet AC DC MP Series SIP SSR Ratings to 4A 280 VAC or 3A 60 VDC Triac (AC) or Transistor (DC) output DC Control Normally open (AC or DC) or normally closed output (DC only) CE Compliant to EN60950-1 PRODUCT SELECTION Control Voltage 3 A 3 A 4 A 3 A 3-32 VDC MPDCD3 MP120D3 MP240D3 MP240D4 AVAILABLE OPTIONS Operational Voltage 120: 12-140 VAC Operational Current 240: 24-280 VAC 3: 3 Amps Series DC: 3-60 VDC 4: 4 Amps DC D 3 -B MP Output Function / Type Control Voltage Blank: Normally Open D: 3-32 VDC -B: Normally Closed (DC only) Required for valid part number For options only and not required for valid part number (1) AC OUTPUT SPECIFICATIONS Description MP120D3 MP240D3 MP240D4 Operating Voltage (47-63Hz) Vrms 12-140 24-280 24-280 Transient Overvoltage Vpk 400 600 600 Maximum Off-State Leakage Current Rated Voltage mA 5 5 5 Minimum Off-State dv/dt Maximum Rated Voltage V/sec (2) 200 200 200 3 3 4 Maximum Load Current Arms 0.02 Minimum Load Current Arms 0.02 0.02 Maximum Surge Current (16.6ms) Apk 90 90 130 1.6 1.6 1.6 Maximum On-State Voltage Drop Rated Current Vpk Maximum I t for Fusing (50/60Hz, 1/2 cycle) A sec 36 36 72 0.5 0.5 0.5 Minimum Power Factor (with Maximum Load) (1) DC OUTPUT SPECIFICATIONS Description MPDCD3 Operating Voltage (47-63Hz) Vrms 3-60 Maximum Load Current Arms 3 Minimum Load Current mA 0.02 Maximum Surge Current for 1 second Adc 5 Maximum On-State Voltage Drop Rated Current Vpk 1.5 1.0 Maximum Off-State Leakage Current Rated Voltage mA FDE-07-01 REV. A Do not forget to visit us at: www.crydom.com Copyright 2020 Crydom Inc. Specifications subject to change without notice.LOAD LOAD CONTROL CIRCUIT LOAD LOAD PCB Mount DataSheet (1) INPUT SPECIFICATIONS Description AC Output DC Output DC Output (-B) Control Voltage Range VDC 3-32 3-32 3-32 Must Turn On Voltage VDC 3.0 3.0 1.0 Must Turn Off Voltage VDC 1.0 1.0 3.0 Typical Input Current 32VDC mA 23 23 23 1500 Nominal Input Impedance Ohm 1500 1500 1/2 Cycle 0.1 0.1 Maximum Turn-On Time msec Maximum Turn-Off Time msec 1/2 Cycle 0.1 0.1 GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output (50/60Hz) 4000 Vrms 9 Minimum Insulation Resistance ( 500 V DC) 10 Ohms Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range -40C to 80C Ambient Storage Temperature Range -40C to 125C Weight (typical) 0.7 oz. (20g) Encapsulation Thermally Conductive Epoxy Enclosure and PCB Meets the requirements of IEC60335-1 GENERAL NOTES 1) All parameters at 25C unless otherwise specied. 2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 3) Inductive loads should be diode suppressed WIRING DIAGRAM TRIGGER CIRCUIT + + 3 2 1 4 3 2 1 4 -DC +DC -DC +DC B A (3) B A AC AC Load can be wired in location A or B -DC +DC Do not forget to visit us at: www.crydom.com Copyright 2020 Crydom Inc. Specifications subject to change without notice.