GA1A2S100LY Sharp

GA1A2S100SS/GA1A2S100LY OPIC Linear Output GA1A2S100SS/ Ambient Light Sensor GA1A2S100LY Features Agency Approvals/Compliance 1. Linear output, suitable for indoor or outdoor use 1. Compliant with RoHS directive (2002/95/EC) 2. Light sensitivity and response curve similar to that 2. Content information about the six substances of the human eye specified in Management Methods for Control of 3. OPIC light detector: integrated photodiode and sig- Pollution Caused by Electronic Information Prod- nal processing circuit ucts Regulation (popular name: China RoHS) 4. Lead frame packages: (Chinese: ) Straight leads: GA1A2S100SS refer to page 7. L-bend: GA1A2S100LY 5. Stable over specified temperature range 6. Lead-free and RoHS-directive compliant Applications 1. Auto-dimming circuits 2. Office automation equipment 3. Audio visual equipment 4. Home appliances 5. Touch panels OPIC is a trademark of Sharp Corporation. Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 1 Sheet No.: D1-A00501EN Date: October 1, 2007 SHARP CorporationGA1A2S100SS/GA1A2S100LY External Dimensions GA1A2S100SS 1.60 3-0.90 1.27 1.27 0.7 Center of 3.0 light detection 0.7 2-C0.5 1.5E.PIN 0.1 MAX. 0.15 R0.5 2 - 0.9 (1.7) (52) +0.3 +0.3 3 - 0.4 3 - 0.45 -0.1 -0.1 (2.54) (1.27) Pin Arrangement (6) (6) 3 1 No. Name 1 V CC 2 GND (6) (6) 3 I O 2 NOTES: 1. Units: mm 2. Unspecified tolerence: 0.2 mm 3. ( ): Reference dimensions 4. Package: Transparent 5. The thin burr thickness (0.05 mm MAX.) and the gate burr (0.3 mm MAX.) are not included in outline dimensions 6. Resin protrusion: 1.4 mm MAX. however, the thin burr adheres to the lead 1.4 mm MAX. from the resin Sheet No.: D1-A00501EN 2 0.3 MAX. Gate burr 1.4 MAX. resin burr 0.2 MAX. 1.8 Resin burr 1.4 1.45 16.8 2.0 4.0 (4) (4) 2.6 (4) (4) 0.50 1.27