CENB1010 Universal 10 Watt Series ITE Switch-Mode Power Supply 3 Year Warranty 100-240VAC Universal Input Range Meets EISA2007, CEC Efficiency Level V, EU (EC) No 278/2009 Phase II Desktop & Wall Plug Styles 5V to 48V Single Output Models, up to 12W Modified and Custom Designs Available Regulated Output with Low Ripple Impact-Resistant Polycarbonate Enclosure No load Power Consumption <0.3W Limited Power Source nd Certified to UL/EN/IEC60950-1, 2 Edition RoHS LPS Specifications All Specifications are typical at nominal input, full load at 25 C unless otherwise stated. MTBF >250,000 hours (calculated) AC Input 100-240VAC, -/-10%, 47-63 Hz, 1 Input Current 100Vac: 0.27A Hold-up Time 18 ms min. 115Vac, 60 ms min. 230 Vac Inrush Current 60 A peak max at 264 Vac Overload Protection Hiccup Mode Input Fuse Internal Primary Current Fuse provided (1A, 250Vac rated) Short Circuit Protection Hiccup Mode Efficiency Meets EISA2007, CEC Efficiency Level V, Topology Switching Fixed Frequency Flyback EU (EC) No 278/2009 Phase II nd Output Voltage See chart Safety Standards EN/IEC/CSA/UL60950-1, 2 Edition, LPS Output Power See chart EMC, Radiated & Conducted See Chart below Ripple and Noise 1% pk-pk max., 20MHz BW Dielectric Withstand Input-Output: 4,242Vdc, Input-Ground: 1,500 Vac, Output-Ground: 500 Vdc Line & Load Voltage Regulation Line: +/- 1%, Load: +/-5% Operating Temperature 0 to 40C, no derating (0 to 55 C for 5V model, see derating chart) Minimum Load Not required Storage Temperature -30 to +85 C Case Material Black 94V-0 Polycarbonate Relative Humidity 5% to 95%, non-condensing Case Dimensions 84 x 47 x 32mm. See outline drawing Altitude 0 to 10,000 ft Weight 110g Output Cable 20AWG (UL2468), 1500mm, 2 conductor Output Connector 2.5mm barrel type (Ault 3), center contact (+) Other options available, contact the factory for details EMC Specifications Conducted Emissions EN55022 Class B, FCC Part 15, Class B. Radiated Emissions EN55022 Class B, FCC Part 15, Class B. Line Frequency Harmonics EN61000-3-2, Class A Voltage Fluctuations/Flicker EN61000-3-3 Static Discharge Immunity EN61000-4-2, 6kV Contact Discharge, 8kV air discharge Radiated RF Immunity EN61000-4-3, 3V/m. EFT/Burst Immunity EN61000-4-4, 2kV/5kHz. Line Surge Immunity EN61000-4-5, 1kV differential, 2kV common-mode Conducted RF Immunity EN61000-4-6, 3Vrms Power Frequency Magnetic Field Immunity EN61000-4-8, 3A/m Voltage Dip Immunity EN61000-4-11, Criteria B 1 of 3 SL Power Electronics Corp 6050 King Drive Ventura, CA 93003 Phone 805.486.4565 Fax 858.712.2040 Email: info slpower.com www.slpower.comCENB1010 Universal 10 Watt Series ITE Switch-Mode Power Supply 3 Year Warranty Model Number Volts (V) Output Current (max) Max Watts Ripple (Vp-p max) CENB1010A0503F01 5 V 2.00 A 10.0 W 50 mV CENB1010A0603F01 6 V 2.00 A 12.0 W 60 mV CENB1010A0703F01 7.5 V 1.60 A 12.0 W 75 mV CENB1010A0903F01 9 V 1.10 A 10.0 W 90 mV CENB1010A1203F01 12 V 1.00 A 12.0 W 120 mV CENB1010A1503F01 15 V 0.80 A 12.0 W 150 mV CENB1010A1603F01 16 V 0.75 A 12.0 W 160 mV CENB1010A1803F01 18 V 0.67 A 12.0 W 180 mV CENB1010A2403F01 24 V 0.50 A 12.0 W 240 mV CENB1010A4803F01 48 V 0.25 A 12.0 W 480 mV Notes: Part numbers above include 3 output connector and IEC320 C14 grounded input receptacle. See below for other options. Model Number Key CENB 1 010 A VV 03 F 01 Model01 = Standard.02 and higher indicates a modified model. Input Connector: = IEC320 C14 grounded, Other options available, see below Output Connector:03 = 2.5mm Barrel Type Connector. Other options available, contact factory. Output Voltage:05 = 5Vdc,12 = 12Vdc,24 = 24Vdc, etc. Model = Original Configuration Output Power:010 = 10 Watts of Outputs1 = Single Output Product Family: = Commercial/ITE/Industrial, = External,N = Model Series Designator AC Input Receptacle Options Output Connector Desktop Wall-Plug IEC320 - C14 IEC320 - C18 IEC320 - C8 N. America N. America Europe United Australia Class I Class II Class II Japan Japan Kingdom Grounded Ungro undedShave Interchangable Fixed Fixed Fixed Fixed (F) (Q) (N) (B) (C) (M) (G) (H) Notes: 1. For desktop options, choose applicable letter above. Notes: 1. Ault 3 Connector, center contact (+). 2. For Wall-Plug options, choose the applicable letter above and the unit will be fitted with 2. Connector is Switchcraft 760 plug or equivalent. the receptacle chosen. The N. A. blade version (B) will be an interchangeable blade. Mating connector is Switchcraft 712A or equivalent. The other options (C), (M), (G), and (H) will be fixed blades molded in the case. 3. Other connector options are available. Contact your local 3. Blade Kit is available which will include one each of a EU, UK, and Australian blade. Kit part SL Power Representative for details. is KT1027K. These can be used with the (B) version, to allow blades to be changed. Outline Drawings Desktop Style Wall-Plug Style (Option B Shown) 2 of 3 SL Power Electronics Corp 6050 King Drive Ventura, CA 93003 Phone 805.486.4565 Fax 858.712.2040 Email: info slpower.com www.slpower.com