L6393DTR STMicroelectronics

L6393 Half bridge gate driver Datasheet - production data Application Motor driver for home appliances Factory automation Industrial drives and fans 40 HID ballasts Power supply units Features Description High voltage rail up to 600 V The L6393 is a high voltage device manufactured dV/dt immunity 50 V/nsec in full temperature with the BCD offline technology. It is a single range chip half bridge gate driver for the N-channel power MOSFET or IGBT. Driver current capability: 290 mA source, The high-side (floating) section is designed to 430 mA sink stand a voltage rail up to 600 V. Switching times 75/35 nsec rise/fall with 1 nF The logic inputs are CMOS/TTL compatible down load to 3.3 V for the easy interfacing microcontroller/DSP. 3.3 V, 5 V CMOS/TTL input comparators with hysteresis The IC embeds an uncommitted comparator Integrated bootstrap diode available for protections against overcurrent, overtemperature, etc. Uncommitted comparator Adjustable deadtime Compact and simplified layout Bill of material reduction Flexible, easy and fast design September 2015 DocID14497 Rev 5 1/19 This is information on a product in full production. www.st.comContents L6393 Contents 1 Block diagram 3 2 Pin connection 4 3 Truth table . 5 4 Electrical data 6 4.1 Absolute maximum ratings . 6 4.2 Thermal data . 6 4.3 Recommended operating conditions . 7 5 Electrical characteristics . 8 5.1 AC operation . 8 5.2 DC operation 10 6 Waveform definition 12 7 Typical application diagram 13 8 Bootstrap driver . 14 C selection and charging . 14 BOOT 9 Package information 16 SO-14 package information . 16 10 Order codes . 18 11 Revision history . 18 2/19 DocID14497 Rev 5