X-On Electronics has gained recognition as a prominent supplier of LDK320M50R LDO Voltage Regulators across the USA, India, Europe, Australia, and various other global locations. LDK320M50R LDO Voltage Regulators are a product manufactured by STMicroelectronics. We provide cost-effective solutions for LDO Voltage Regulators, ensuring timely deliveries around the world.
We are delighted to provide the LDK320M50R from our LDO Voltage Regulators category, at competitive rates not only in the United States, Australia, and India, but also across Europe and beyond. A long established and extensive electronic component distribution network has enhanced our global reach and dependability, ensuring cost savings through prompt deliveries worldwide. Client satisfaction is at the heart of our business, where every component counts and every customer matters. Our technical service team is ready to assist you. From product selection to after-sales support, we strive to deliver a seamless and satisfying experience. Are you ready to experience the best in electronic component distribution? Contact X-ON Electronics today and discover why X-On are a preferred choice for the LDK320M50R and other electronic components in the LDO Voltage Regulators category and beyond.
LDK320 200 mA high accuracy and high PSRR voltage regulator Features Input voltage from 2.5 to 18 V Very low-dropout voltage (100 mV typ. 100 mA load) SOT23-5L SOT-89 Low quiescent current (typ. 60 A, 1 A in off mode) High PSRR: 88 dB 120 Hz Low noise Output voltage tolerance: 0.5% 25 C (LDK320A) or 2% 25 C Output current up to 200 mA Wide range of output voltages available on request: fixed from 1.2 V to 12 V with 100 mV step and adjustable Logic-controlled electronic shutdown Compatible with ceramic capacitor C = 1 F OUT Current, SOA and thermal protections Available in SOT23-5L and SOT-89 packages Temperature range: -40 C to 125 C Applications DSC TV BD, DVD PC Maturity status link Industrial LDK320 Description The LDK320 is a low drop voltage regulator, which provides a maximum output current of 200 mA from an input voltage in the range of 2.5 V to 18 V, with a typical dropout voltage of 100 mV. It is stabilized with a ceramic capacitor on the output. The very good dynamic characteristic, combined with low drop voltage and low quiescent current make it suitable for low power battery-powered applications. The enable logic control function allows the LDK320 to be in shutdown mode by consuming a total current lower than 1 A. This device also includes a short-circuit current limiting, thermal and SOA protections. DS11321 - Rev 8 - November 2020 www.st.com For further information contact your local STMicroelectronics sales office.LDK320 Diagrams 1 Diagram Figure 1. Block diagram (fixed version) V IN V OUT Bias generator OP-AMP EN Enable Thermal protection Bandgap reference Current limit GND GIPD030820151330MT Figure 2. Block diagram (adjustable version) V IN V OUT Bias generator OP-AMP EN Enable ADJ Thermal protection Bandgap reference Current limit GND DS11321 - Rev 8 page 2/29