P-L496G-CELL01 STM32 discovery pack for 2G/3G cellular to cloud Data brief Features STM32L496AGI6 microcontroller featuring 1 Mbyte of Flash memory and 320 Kbytes of RAM in a UFBGA169 package USB OTG HS On-board current measurement SAI Audio CODEC ST-MEMS digital microphones 8-Mbit PSRAM 2 user LEDs Picture is not contractual. 1 user and 1 reset push-buttons On-board ST-LINK/V2-1 SWD,TAG 4-direction joystick with selection button debugger/programmer with USB re- Board connectors: enumeration capability: mass storage, virtual COM port and debug port Camera 8 bit Comprehensive free software libraries and USB with Micro-AB examples available with the STM32Cube Stereo headset jack including analog package microphone input Support of a wide choice of Integrated microSD card Development Environments (IDEs) including Board expansion connectors: IAR, Keil , GCC-based IDEs Arduino Uno V3 STMod+ Board expansion features: Description Quectel UG96 worldwide cellular modem penta-band 2G/3G module, 7.2 Mbps downlink, 5.76 Mbps uplink The P-L496G-CELL01 STM32 discovery pack for Modem reset red LED and modem 2G/3G cellular to cloud (STM32-C2C/2G-3G) is a signaling green LED turnkey development platform for cellular and ST Incard eSIM based on ST33 cloud technology based solutions. Switchable SIM interface, eSIM and The pack is composed of an STM32L496AGI6- MicroSIM based low-power discovery mother board with preloaded firmware, and an STMod+ cellular Pulse 2G/3G SMA antenna for frequency expansion board with antenna. ranges: 850 / 900 / 1800 / 1900 / 2100 MHz Flexible power-supply options: ST-LINK, USB V , or external sources BUS May 2018 DB3400 Rev 3 1/4 For further information contact your local STMicroelectronics sales office. www.st.comGeneral information P-L496G-CELL01 General information The firmware of the P-L496G-CELL01 discovery pack runs on the STM32L496AGI6 Arm -based device. System requirements Windows OS (7, 8 and 10), Linux 64-bit or macOS USB Type-A to Micro-B cable Development toolchains (a) Keil MDK-ARM (a) IAR EWARM GCC-based IDEs including free SW4STM32 from AC6 Demonstration software The STM32 Flash preloaded demonstration software yields an electronic ST Voucher and a URL through the USB ST-Link Virtual COM port, which, through a dedicated STM32-C2C Concierge Portal, allows the Discovery Pack owner to enable corresponding services from ST and various partners, including many precompiled demo Flash binaries. The latest versions of the demonstration source code and associated documentation can be downloaded from the www.st.com webpage. Ordering information To order the P-L496G-CELL01 discovery pack refer to Table 1. a. On Windows only 2/4 DB3400 Rev 3