SPC56XVTOP-M STMicroelectronics

SPC56xVTOP-M SPC56xVTOP-M Vertical Calibration Top board Data brief - production data SPC563MxxAVBx Vertical base board for SPC563x line and moreover the board enables the use of new enhanced automotive calibration and debug tools on the SPC563Mx line of automotive microcontrollers, featuring a 16-bit bus interface. Features 1 MByte high-speed static RAM organized as 1024K words by 16 bits 16-bit multiplexed Calibration bus configuration Support for Nexus-based debug tools even if application PCB does not include Nexus connector Nexus functionality with 16 Message Data Out (MDO) signals High speed CAN transceiver with signals protection ST A5973D step down monolithic power switching regulator. Description Calibration is a process of optimizing a control algorithm to get the desired response from the system. A calibration tool is a combination of a hardware interface and a software application that enables the engineer to access thecalibration variable in an ECU and change them. The SPC56xVTOP-M Vertical Calibration Top board is designed to work with the April 2016 DocID029177 Rev 1 1/4 This is information on a product in full production. For further information contact your local STMicroelectronics sales www.st.com office.Order codes SPC56xVTOP-M 1 Order codes Table 1. Order codes Part number Reference RAM/Debug Top Board for SPC563x Vertical SPC56xVTOP-M Base boards VertiCal Base Board for M-Line target in SPC563M64AVB144 LQFP144 package VertiCal Base Board for M-Line target in SPC563M64AVB176 LQFP176 package 2/4 DocID029177 Rev 1