ST25DV-PWM-ESET STMicroelectronics

ST25DV-PWM-eSET Discovery kit for the ST25DV-PWM NFC/RFID tag IC Data brief Memory and data protection 2-Kbit EEPROM Up to four independent areas TruST25 digital signature mechanism for authentication FCC verified RoHS compliant Description The ST25DV-PWM-eSET is a dynamic NFC tag evaluation board based on the ST25DV02K-W2 device, an NFC/RFID tag IC with PWM outputs Features embedding a 2-Kbit EEPROM that can be partitioned for use-case flexibility. Ready-to-use printed circuit board with: ST25DV02K-W2 NFC/RFID tag IC in The PWM output can be programmed SO8N ECOPACK2 package independently and securely, allowing the user to 2 address a large number of applications. The IC 22 x 38 mm single layer inductive provides live update of PWM parameters by antenna, etched on the PCB contactless interface, extending the user Two LEDs illustrating duty cycle of PWM experience. The device can be operated from a outputs 13.56 MHz RFID reader or by any NFC mobile Contactless interface phone. The contactless interface is based on Based on ISO/IEC 15693 and NFC Forum ISO/IEC 15693 and NFC Forum Type 5 tag Type 5 standards. 28.5 pF internal tuning capacitance Figure 1. Functional block diagram 9 86% PP PP 9 SRZHU VXSSO DQWHQQD ORRS 8 3:0 RXWSXWV 67 9 . : ,QWHJUDWRU &RPSDUDWRUV /( V 0+ 8VHU FRQQHFWRU 06 9 September 2018 DB3682 Rev 1 1/3 For further information contact your local STMicroelectronics sales office. www.st.comRevision history ST25DV-PWM-eSET Revision history Table 1. Document revision history Date Revision Changes 07-Sep-2018 1 Initial release. 2/3 DB3682 Rev 1