STEVAL-IDI002V2 STMicroelectronics

STEVAL-IDI002V2 Multi-sensor RF platform 6LoWPAN & NFC interface board Data brief Description The STEVAL-IDI002V2 is an evaluation platform for a 6LoWPAN multi-sensor RF network based on the SPIRIT1 Sub-GHz RF transceiver and the STM32L152RBT6 low power Cortex M3 microcontroller. The STM32L152RBT6 runs the open source 6LoWPAN Contiki stack. In addition to the 6LoWPAN stack, an application is provided which communicates with the various sensors on the STEVAL-IDI003V2 daughterboard through a 10-pin connector. Alternatively, this connector can be used to control/interface with any sensor or actuator. This 6LoWPAN multi-sensor RF board communicates with the STEVAL-IDI004V2 IoT wireless bridge evaluation board. Features SPIRIT1-based 868 MHz RF platform Low power STM32L series microcontroller Contains the M24LR64E dual EEPROM Can be powered by USB or Li-Ion battery Runs the 6LoWPAN Contiki stack SPIRIT1: Supports from 150 MHz to 956 MHz 9 mA receiving & 21 mA transmitting at +11 dbm Built-in AES 128-bit encryption sensitivity up to -118 dbm To be used with multi-sensor board STEVAL-IDI003V2 Can be used to evaluate/develop applications for IoT Android App available to connect to STEVAL-IDI004V2 RoHS compliant October 2015 DocID028223 Rev 1 1/6 www.st.com For further information contact your local STMicroelectronics sales office Schematic diagrams STEVAL-IDI002V2 1 Schematic diagrams Figure 1: STEVAL-IDI002V2 circuit schematic (1 of 7) GSPG10082015DI1540 Figure 2: STEVAL-IDI002V2 circuit schematic (2 of 7) GSPG10082015DI1545 2/6 DocID028223 Rev 1