STM32F765xx STM32F767xx STM32F768Ax STM32F769xx Arm Cortex -M7 32b MCU+FPU, 462DMIPS, up to 2MB Flash/ 512+16+4KB RAM, USB OTG HS/FS, 28 com IF, LCD, DSI Datasheet - production data Features Includes ST state-of-the-art patented technology LQFP100 (14 14 mm) Core: Arm 32-bit Cortex -M7 CPU with UFBGA176 (10 x 10 mm) WLCSP180 (0.4 mm pitch) DPFPU, ART Accelerator and L1-cache: LQFP144 (20 20 mm) TFBGA216 (13 x 13 mm) 16 Kbytes I/D cache, allowing 0-wait state LQFP176 (24 24 mm) TFBGA100 (8 x 8 mm) execution from embedded Flash and external LQFP208 (28 x 28 mm) memories, up to 216 MHz, MPU, 462 DMIPS/2.14 DMIPS/MHz (Dhrystone 2.1), 32 kHz oscillator for RTC with calibration and DSP instructions. Internal 32 kHz RC with calibration Memories Low-power Up to 2 Mbytes of Flash memory organized Sleep, Stop and Standby modes into two banks allowing read-while-write V supply for RTC, 3232 bit backup BAT SRAM: 512 Kbytes (including 128 Kbytes registers + 4 Kbytes backup SRAM of data TCM RAM for critical real-time data) 312-bit, 2.4 MSPS ADC: up to 24 channels + 16 Kbytes of instruction TCM RAM (for critical real-time routines) + 4 Kbytes of Digital filters for sigma delta modulator backup SRAM (DFSDM), 8 channels / 4 filters Flexible external memory controller with up 212-bit D/A converters to 32-bit data bus: SRAM, PSRAM, General-purpose DMA: 16-stream DMA SDRAM/LPSDR SDRAM, NOR/NAND controller with FIFOs and burst support memories Up to 18 timers: up to thirteen 16-bit (1x low- Dual mode Quad-SPI power 16-bit timer available in Stop mode) and Graphics two 32-bit timers, each with up to 4 Chrom-ART Accelerator (DMA2D), IC/OC/PWM or pulse counter and quadrature graphical hardware accelerator enabling (incremental) encoder input. All 15 timers enhanced graphical user interface running up to 216 MHz. 2x watchdogs, SysTick timer Hardware JPEG codec LCD-TFT controller supporting up to XGA Debug mode resolution SWD and JTAG interfaces MIPI DSI host controller supporting up to Cortex -M7 Trace Macrocell 720p 30 Hz resolution Up to 168 I/O ports with interrupt capability Clock, reset and supply management Up to 164 fast I/Os up to 108 MHz 1.7 V to 3.6 V application supply and I/Os Up to 166 5 V-tolerant I/Os POR, PDR, PVD and BOR Dedicated USB power 4-to-26 MHz crystal oscillator Internal 16 MHz factory-trimmed RC (1% accuracy) February 2021 DS11532 Rev 7 1/252 This is information on a product in full production. www.st.comSTM32F765xx STM32F767xx STM32F768Ax STM32F769xx Up to 28 communication interfaces Advanced connectivity 2 Up to 4 I C interfaces (SMBus/PMBus) USB 2.0 full-speed device/host/OTG controller with on-chip PHY Up to 4 USARTs/4 UARTs (12.5 Mbit/s, ISO7816 interface, LIN, IrDA, modem USB 2.0 high-speed/full-speed control) device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI Up to 6 SPIs (up to 54 Mbit/s), 3 with 2 muxed simplex I S for audio 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII 2 x SAIs (serial audio interface) 3 CANs (2.0B Active) and 2x SDMMCs 8- to 14-bit camera interface up to 54 Mbyte/s SPDIFRX interface True random number generator HDMI-CEC CRC calculation unit MDIO slave interface RTC: subsecond accuracy, hardware calendar 96-bit unique ID Table 1. Device summary Reference Part number STM32F765BI, STM32F765BG, STM32F765NI, STM32F765NG, STM32F765II, STM32F765xx STM32F765IG, STM32F765ZI, STM32F765ZG, STM32F765VI, STM32F765VG STM32F767BG, STM32F767BI, STM32F767IG, STM32F767II, STM32F767NG, STM32F767xx STM32F767NI, STM32F767VG, STM32F767VI, STM32F767ZG, STM32F767ZI STM32F768Ax STM32F768AI STM32F769AG, STM32F769AI, STM32F769BG, STM32F769BI, STM32F769IG, STM32F769xx STM32F769II, STM32F769NG, STM32F769NI 2/252 DS11532 Rev 7