STM32MP157D-EV1 STM32MP157F-EV1 Data brief Evaluation boards with increased-frequency 800 MHz STM32MP157 MPUs Features STM32MP157 Arm -based dual Cortex A7 800 MHz 32 bits + Cortex M4 32 bits MPU in LFBGA448 package ST PMIC STPMIC1 2 4-Gbit DDR3L, 16 bits, 533 MHz 2 512-Mbit Quad-SPI Flash memory 32-Gbit eMMC v5.0 8-Gbit SLC NAND, 8 bits, 8-bit ECC, 4-KB PS 1-Gbit/s Ethernet (RGMII) compliant with IEEE-802.3ab USB Host 4-port hub USB OTG HS CAN FD SM 5.5 TFT 7201280 pixels with LED backlight, MIPI DSI interface, and capacitive touch panel SAI audio codec STM32MP157F-EV1 top view. Picture 5-megapixel, 8-bit camera is not contractual. 4 ST-MEMS digital microphones Smartcard microSD card 2 user LEDs 2 user and reset push-buttons, 1 wake-up button Product status link 4-direction joystick with selection button 5 V / 4 A power supply STM32MP157D-EV1 Board connectors: STM32MP157F-EV1 Ethernet RJ45 4 USB Host Type-A USB OTG Micro-AB SPDIF RCA input and output CAN FD Stereo headset jack including analog microphone input Audio jack for external speakers Motor control 2 External I C LTDC Trace, JTAG, RS-232 GPIO expansion connector (Raspberry Pi shields capability) MEMS-microphone daughterboard expansion connector On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability: Virtual COM port and debug port STM32CubeMP1 and full mainline open-source Linux STM32 MPU OpenSTLinux Distribution (such as STM32MP1Starter) software and examples Support of a wide choice of Integrated Development Environments (IDEs) including IAR Embedded Workbench , MDK-ARM, and STM32CubeIDE DB4021 - Rev 2 - October 2020 www.st.com For further information contact your local STMicroelectronics sales office.STM32MP157D-EV1 STM32MP157F-EV1 Description 1 Description The STM32MP157D-EV1 and STM32MP157F-EV1 Evaluation boards are the full-feature demonstration and development platforms for STMicroelectronics increased-frequency 800 MHz Arm -based dual Cortex A7 32 bits and Cortex M4 32 bits MPUs in the STM32MP1 Series. They leverage the capabilities of STM32MP1 Series microprocessors to allow users develop applications using STM32 MPU OpenSTLinux Distribution software for the main processor and STM32CubeMP1 software for the co-processor. They include an ST-LINK embedded debug tool, LEDs, push-buttons, one joystick, 1-Gbps Ethernet, CAN FD, one USB OTG Micro-AB connector, four USB Host Type-A connectors, LCD display with touch panel, camera, stereo headset jack with analog microphone input, four digital microphones, one SPDIF Rx/Tx, smartcard, microSD card, and eMMC, NOR and NAND Flash memories. To expand the functionality of the STM32MP157D-EV1 and STM32MP157F-EV1 Evaluation boards, two GPIO expansion connectors are also available for motor control and Raspberry Pi shields. DB4021 - Rev 2 page 2/7