STPS3L60 Datasheet 60 V, 3 A low drop Schottky rectifier Features Negligible switching losses Low forward voltage drop Avalanche rated ECOPACK2 component Applications Switching diode SMPS DC/DC converter LED lighting Description Axial and surface mount power Schottky rectifier suited for switch mode power supplies and high frequency dc to dc converters. Packaged in DO-201AD, DO-15, SMB, SMBflat and SMBflat Notch, this device is intended for use in low voltage, high frequency inverters and small battery chargers and for applications where there are space constraints, for example telecom battery charger. Product status STPS3L60 Product summary Symbol Value I F(AV) 3 A V 60 V RRM T 150 C j(max.) V 0.53 V F(typ.) DS2134 - Rev 7 - January 2020 www.st.com For further information contact your local STMicroelectronics sales office.STPS3L60 Characteristics 1 Characteristics Table 1. Absolute ratings (limiting values at 25 C, unless otherwise specified) Symbol Parameter Value Unit V Repetitive peak reverse voltage 60 V RRM I Forward rms current 10 A F(RMS) T = 115 C SMB Flat Notch, SMB Flat L Average forward current, = 0.5, square I T = 105 C SMB, DO-201AD 3 A F(AV) L wave DO-15 T = 72 C L I Surge non repetitive forward current t = 10 ms sinusoidal 100 A FSM p P Repetitive peak avalanche power t = 10 s, T = 125 C 144 W ARM p j T Storage temperature range -65 to +150 C stg (1) T Maximum operating junction temperature +150 C j 1. (dP /dT ) < (1/R ) condition to avoid thermal runaway for a diode on its own heatsink. tot j th(j-a) Table 2. Thermal resistance parameter Symbol Parameter Max. value Unit SMB Flat Notch, SMB Flat 15 Junction to leads SMB 20 R C/W th(j-l) DO-201AD 20 Junction to leads, lead length = 10 mm DO-15 35 For more information, please refer to the following application note : AN5088 : Rectifiers thermal management, handling and mounting recommendations Table 3. Static electrical characteristics Symbol Parameter Test conditions Min. Typ. Max. Unit T = 25 C - 150 A j (1) I Reverse leakage current T = 100 C V = V 4 15 j R RRM R mA T = 125 C - 14 30 j T = 25 C - 0.62 j T = 100 C I = 3 A 0.53 0.61 j F T = 125 C - 0.51 0.59 j (1) V Forward voltage drop V F T = 25 C - 0.79 j T = 100 C I = 6 A 0.62 0.71 j F T = 125 C - 0.6 0.69 j 1. Pulse test: t = 380 s, < 2% p DS2134 - Rev 7 page 2/17