STTH30R06W STMicroelectronics

STTH30R06 Turbo 2 ultrafast high voltage rectifier Datasheet - production data Description This device uses ST Turbo 2 600 V technology, and is particularly suited as boost diode in discontinuous or critical mode power factor corrections. It is also intended for use as a freewheeling diode in power supplies and other power switching applications. Table 1: Device summary Symbol Value IF(AV) 30 A VRRM 600 V Tj 175 C Features V (typ.) 1.10 V F Ultrafast switching Low reverse current t (max.) 50 ns rr Low thermal resistance Reduce switching and conduction losses June 2017 DocID10938 Rev 3 1/11 www.st.com This is information on a product in full production. Characteristics STTH30R06 1 Characteristics Table 2: Absolute ratings (limiting values, at 25 C, unless otherwise specified) Symbol Parameter Value Unit VRRM Repetitive peak reverse voltage 600 V I Forward rms current 50 A F(RMS) DO-247 TC = 115 C Average forward current I 30 A F(AV) = 0.5, square wave DOP-3I T = 85 C C IFSM Surge non repetitive forward current tp = 10 ms sinusoidal 300 A T Storage temperature range -65 to +175 C stg Tj Maximum operating junction temperature 175 C Table 3: Thermal parameters Symbol Parameter Max. value Unit DO-247 1.1 R Junction to case C/W th(j-c) DOP-3I 1.7 Table 4: Static electrical characteristics Symbol Parameter Test conditions Min. Typ. Max. Unit T = 25 C - 25 j (1) I Reverse leakage current V = V A R R RRM Tj = 125 C - 80 800 T = 25 C - 1.85 j (2) V Forward voltage drop I = 30 A V F F Tj = 125 C - 1.10 1.40 Notes: (1) Pulse test: t = 5 ms, < 2% p (2) Pulse test: t = 380 s, < 2% p To evaluate the conduction losses, use the following equation: 2 P = 1.07 x IF(AV) + 0.011 x IF (RMS) 2/11 DocID10938 Rev 3