STTH6002CW STMicroelectronics

STTH6002C High efficiency ultrafast diode Main product characteristics I 2 x 30 A F(AV) A1 V 200 V RRM K A2 T (max) 175 C j V (typ) 0.75 V F t (typ) 22 ns rr A2 K Features and benefits A1 Suited for SMPS TO-247 STTH6002CW Low losses Low forward and reverse recovery times High surge current capability NC High junction temperature A2 Description K A1 Dual center tab rectifier suited for switch mode power supplies and high frequency DC to DC TOP3I converters. STTH6002CPI Packaged in TO-247 and TOP3I, this device is intended for use in low voltage, high frequency inverters, free wheeling and polarity protection Order codes Part Number Marking STTH6002CW STTH6002C STTH6002CPI STTH6002C April 2006 Rev 2 1/9 www.st.comCharacteristics STTH6002C 1 Characteristics Table 1. Absolute ratings (limiting values at T = 25 C, unless otherwise specified) j Symbol Parameter Value Unit V Repetitive peak reverse voltage 200 V RRM I RMS forward current 50 A F(RMS) Per diode T = 140 C 30 c TO-247 Per device T = 125 C 60 c I Average forward current, = 0.5 A F(AV) Per diode T = 120 C 30 c TOP3I Per device T = 105 C 60 c I Surge non repetitive forward current t = 10 ms Sinusoidal 330 A FSM p T Storage temperature range -65 to +175 C stg T Maximum operating junction temperature 175 C j Table 2. Thermal parameters Symbol Parameter Value Unit Per diode 1.2 TO-247 Total 0.8 R Junction to case th(j-c) Per diode 1.8 TOP3I C/W Total 1.20 TO-247 0.4 R Coupling th(c) TOP3I 0.6 When the two diodes 1 and 2 are used simultaneously: Tj(diode 1) = P (diode 1) X R (Per diode) + P (diode 2) x R th(j-c) th(c) 2/9