TDA7293V-E

TDA7293 120-volt, 100-watt, DMOS audio amplifier with mute and standby Features Multipower BCD technology Very high operating voltage range (50 V) Multiwatt15V DMOS power stage Multiwatt15H High output power (100 W into 8 class AB amplifier in Hi-Fi field applications, such THD =10%, with V = 40 V) S as home stereo, self powered loudspeakers and Muting and stand-by functions Topclass TV. Thanks to the wide voltage range and to the high output current capability it is able No switch on/off noise to supply the highest power into both 4- and 8- Very low distortion loads. Very low noise The built-in muting function with turn-on delay Short-circuit protected (with no input signal simplifies the remote operation avoiding on-off applied) switching noises. Thermal shutdown Parallel mode is possible by connecting several Clip detector devices and using pin11. High output power can be delivered to very low impedance loads, so Modularity (several devices can easily be optimizing the thermal dissipation of the system connected in parallel to drive very low impedances) Table 1. Device summary Order code Package Description TDA7293V Multiwatt15V The TDA7293 is a monolithic integrated circuit in Multiwatt15 package, intended for use as audio TDA7293HS Multiwatt15H Figure 1. TDA7293 block diagram C7 100nF +Vs C6 1000F R3 22K BUFFER DRIVER +Vs +PWVs C2 R2 7111 3 22F 680 IN- 2 - 14 OUT C1 470nF IN+ 3 + BOOT R1 22K 12 LOADER SGND 4 C5 (*) 22F (**) 6 BOOTSTRAP VMUTE R5 10K MUTE 10 5 VCLIP MUTE THERMAL S/C CLIP DET SHUTDOWN PROTECTION VSTBY STBY 9 STBY R4 22K 1 8 15 STBY-GND -Vs -PWVs C3 10F C4 10F C9 100nF C8 1000F D97AU805A -Vs (*) see Application note (**) for SLAVE function September 2010 Doc ID 6744 Rev 8 1/21 www.st.com 21Contents TDA7293 Contents 1 Pin connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.2 Thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3 Circuit description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3.1 Output Stage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3.2 Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 3.3 Other Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 4 Applications information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 4.1 Applications suggestions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 4.2 High efficiency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 4.3 Bridge application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 4.4 Modular application (ref. figure 12) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 4.5 Bootstrap capacitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 5 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 5.1 Vertically-mounted package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 5.2 Horizontally-mounted package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 2/21 Doc ID 6744 Rev 8