TSX3702IDT STMicroelectronics

TSX3702 Datasheet Micropower dual CMOS voltage comparators Features Low supply current: 5 A typ. per comparator Wide single supply range 2.7 V to 16 V or dual supplies (1.35 V to 8 V) Extremely low input bias current: 1 pA typ. Input common-mode voltage range includes ground Push-pull output 12 High input impedance: 10 typ Fast response time: 2.7 s typ. for 5 mV overdrive ESD tolerance: 4 kV HBM, 200 V MM Applications Automotive Industrial Description The TSX3702 is a micropower CMOS dual voltage comparator which exhibits a very low current consumption of 5 A typical per comparator. This device was designed as the improvement of the TS3702: it shows a lower current consumption, a better input offset voltage, and an enhanced ESD tolerance. The TSX3702 is fully specified over a wide temperature range and is proposed in automotive grade for the SO8 package. Product status link It is fully compatible with the TS3702 CMOS comparator and is available with similar packages. New tiny packages (MiniSO8 and DFN8 2x2 mm) are also proposed for TSX3702 the TSX3702 thus allowing even more integration on applications. Related products for open drain See TSX393 output products DS10241 - Rev 5 - September 2019 www.st.com For further information contact your local STMicroelectronics sales office.TSX3702 Package pin connections 1 Package pin connections Figure 1. Pin connections top view 1 8 Out1 Vcc+ - 7 In1- 2 Out2 3 6 In1+ + - In2- 4 5 Vcc- In2+ + DS10241 - Rev 5 page 2/25