ULN2801A STMicroelectronics

ULN2801A, ULN2802A, ULN2803A, ULN2804A Eight Darlington arrays Datasheet - production data Description The ULN2801A, ULN2802A, ULN2803A and ULN2804A each contain eight Darlington transistors with common emitters and integral suppression diodes for inductive loads. Each Darlington features a peak load current rating of 600 mA (500 mA continuous) and can withstand at least 50 V in the OFF state. Outputs may be paralleled for higher current capability. DIP-18 Four versions are available to simplify interfacing to standard logic families: the ULN2801A is designed for general purpose applications with a current limit resistor the ULN2802A has a 10.5 k input resistor and Zener for 14-25 V PMOS Features the ULN2803A has a 2.7 k input resistor for 5 V TTL and CMOS the ULN2804A has a 10.5 k Eight Darlington transistors with common input resistor for 6-15 V CMOS. emitters All types are supplied in an 18-lead plastic DIP Output current to 500 mA with a copper lead form and feature the Output voltage to 50 V convenient input-opposite-output pinout to Integral suppression diodes simplify board layout. Versions for all popular logic families Output can be paralleled Inputs pinned opposite outputs to simplify board layout Table 1. Device summary Order codes Package ULN2801A ULN2802A DIP-18 ULN2803A ULN2804A June 2018 DocID1536 Rev 4 1/14 This is information on a product in full production. www.st.comContents ULN2801A, ULN2802A, ULN2803A, ULN2804A Contents 1 Diagram . 3 2 Pin configuration 4 3 Maximum ratings 5 4 Electrical characteristics . 6 5 Test circuits 7 6 Typical performance characteristics 9 7 Package mechanical data 11 8 Revision history . 13 2/14 DocID1536 Rev 4