VN820SPTR-E STMicroelectronics

VN820-E High-side driver Datasheet production data Features 10 Type R I V DS(on) OUT CC 1 VN820-E 2 P PAK PowerSO-10 VN820SP-E VN820B5-E 40 m 9A 36V VN820PT-E VN820-12-E VN820-11-E PPAK PENTAWATT ECOPACK : lead free and RoHS compliant Automotive Grade: compliance with AEC Description guidelines Very low stadby current The VN820-E is a monolithic device designed in STMicroelectronic s VIPower M0-3 technology. CMOS compatible input The VN820-E is intended for driving any type of On-state open-load detection load with one side connected to ground. The Off-state open-load detection active V pin voltage clamp protects the device CC against low energy spikes. Thermal shutdown protection and diagnosis Active current limitation combined with thermal Undervoltage shutdown shutdown and automatic restart protect the device Overvoltage clamp against overload. The device detects the open- Output stuck to V detection CC load condition in both on- and off-state mode. In the off-state the device detects if the output is Load current limitation shorted to V . The device automatically turns off CC Reverse battery protection where the ground pin becomes disconnected. Electrostatic discarge protection Table 1. Device summary Order codes Package Tube Tape and reel VN820-E PENTAWATT VN820-12-E - VN820-11-E PowerSO-10 VN820SP-E VN820SPTR-E 2 P PAK VN820B5-E VN820B5TR-E PPAK VN820PT-E VN820PTTR-E September 2013 Doc ID 10890 Rev 8 1/44 This is information on a product in full production. www.st.com 1Contents VN820-E Contents 1 Block diagram and pin description . 7 2 Electrical specifications 8 2.1 Absolute maximum ratings . 8 2.2 Thermal data . 9 2.3 Electrical characteristics 10 2.4 Electrical characteristics curves 15 3 Application information . 18 3.1 GND protection network against reverse battery . 18 3.1.1 Solution 1: resistor in the ground line (RGND only) 18 3.1.2 Solution 2: diode (DGND) in the ground line . 19 3.2 Load dump protection 19 3.3 MCU I/Os protection . 19 3.4 Open-load detection in off-state 19 2 3.5 PowerSO-10, P PAK, PPAK, PENTAWATT maximum demagnetization energy (V = 13.5V) 21 CC 4 Package and PCB thermal data . 22 2 4.1 P PAK thermal data . 22 4.2 PPAK thermal data 25 4.3 PowerSO-10 thermal data 28 5 Package and packing information . 31 5.1 ECOPACK packages . 31 5.2 PENTAWATT mechanical data . 31 2 5.3 P PAK mechanical data 33 5.4 PPAK mechanical data . 35 5.5 PowerSO-10 mechanical data . 37 5.6 PENTAWATT packing information 39 2 5.7 P PAK packing information . 39 5.8 PPAK packing information 40 2/44 Doc ID 10890 Rev 8