VND5160JTR-E STMicroelectronics

VND5160J-E Double channel high side driver for automotive applications Features Max supply voltage V 41V CC Operating voltage range V 4.5 to 36V CC PowerSSO-12 Max on-state resistance R 160 m ON Electrostatic discharge protection Current limitation (typ) I 5A LIMH (1) Off state supply current (typ) I 2 A S 1. Typical value with all loads connected. Application General All types of resistive, inductive and capacitive Inrush current active management by loads power limitation Very low stand-by current Description 3.0V CMOS compatible input The VND5160J-E is a monolithic device made Optimized electromagnetic emission using STMicroelectronics VIPower M0-5 Very low electromagnetic susceptibility technology. It is intended for driving resistive or In compliance with the 2002/95/EC inductive loads with one side connected to European directive ground. Active V pin voltage clamp protects the CC device against low energy spikes (see ISO7637 Diagnostic functions transient compatibility table). Open drain status output On state open load detection The device detects open load condition in both ON and OFF states, when STAT DIS is left open Off state open load detection or driven low. Output shorted to V is detected in CC Thermal shutdown indication the OFF state. Protection When STAT DIS is driven high, the STATUS pin is Undervoltage shut-down in a high impedance condition. Overvoltage clamp Output stuck to Vcc detection Output current limitation protects the device in Load current limitation overload condition. In case of long duration overload, the device limits the dissipated power to Self limiting of fast thermal transients safe level up to thermal shut-down intervention. Protection against loss of ground and loss Thermal shut-down with automatic restart allows of V CC the device to recover normal operation as soon as Thermal shut down fault condition disappears. Reverse battery protection (see Figure 28) Table 1. Device summary Order codes Package Part number (Tube) Part number (Tape & Reel) PowerSSO-12 VND5160J-E VND5160JTR-E September 2013 Rev 6 1/31 www.st.com 31Contents VND5160J-E Contents 1 Block diagram and pin description . 5 2 Electrical specifications 7 2.1 Absolute maximum ratings . 7 2.2 Thermal data . 8 2.3 Electrical characteristics . 9 2.4 Electrical characteristics curves 16 3 Application information . 20 3.1 GND protection network against reverse battery . 20 3.1.1 Solution 1 : resistor in the ground line (RGND only) . 20 3.1.2 Solution 2: a diode (DGND) in the ground line . 21 3.2 Load dump protection 21 3.3 MCU I/Os protection . 21 3.4 Open load detection in Off state 21 3.5 Maximum demagnetization energy (VCC = 13.5V) . 23 4 Package and PCB thermal data . 24 4.1 PowerSSO-12 thermal data . 24 5 Package information 27 5.1 ECOPACK packages . 27 5.2 PowerSSO-12 package information . 27 5.3 Packing information . 29 6 Revision history . 30 2/31