VND7E025AJTR STMicroelectronics

VND7E025AJ Datasheet Double channel high-side driver with CurrentSense analog feedback for automotive applications Features V Max. transient supply voltage 40 V CC V Operating voltage range 4 to 28 V CC R Typ. on-state resistance (per Ch) 27 m ON Current limitation (typ) I 61 A LIMH Standby current (max) I 0.5 A STBY Minimum cranking supply voltage (V decreasing) V 2.85 V CC USD cranking PowerSSO-16 AEC-Q100 qualified Extreme low voltage operation for deep cold cranking applications (compliant with LV124, revision 2013) General Double channel smart high-side driver with CurrentSense analog feedback Very low standby current Compatible with 3 V and 5 V CMOS outputs CurrentSense diagnostic functions Analog feedback of: load current with high precision proportional current mirror Overload and short to ground (power limitation) indication Thermal shutdown indication Product status OFF-state open-load detection VND7E025AJ Output short to V detection CC Product summary Sense enable/disable Protections Order code VND7E025AJTR Undervoltage shutdown Package PowerSSO-16 Overvoltage clamp Packing Tape and reel Load current limitation Self limiting of fast thermal transients Configurable latch-off on overtemperature or power limitation with dedicated fault reset pin Loss of ground and loss of V CC Reverse battery with external components Electrostatic discharge protection Applications Automotive resistive, inductive and capacitive loads Protected supply for ADAS systems: radars and sensors Automotive lamps DS11962 - Rev 5 - July 2019 www.st.com For further information contact your local STMicroelectronics sales office.VND7E025AJ Description The device is a dual channel high-side driver manufactured using ST proprietary VIPower M0-7 technology and housed in PowerSSO-16 package. The device is designed to drive 12 V automotive grounded loads through a 3 V and 5 V CMOS- compatible interface, providing protection and diagnostics. The device integrates advanced protective functions such as load current limitation, overload active management by power limitation and overtemperature shutdown with configurable latch-off. A FaultRST pin unlatches the output in case of fault or disables the latch-off functionality. A dedicated multifunction multiplexed analog output pin delivers sophisticated diagnostic functions including high precision proportional load current sense, supply voltage feedback and chip temperature sense, in addition to the detection of overload and short circuit to ground, short to V and OFF-state open-load. CC A sense enable pin allows OFF-state diagnosis to be disabled during the module low- power mode as well as external sense resistor sharing among similar devices. DS11962 - Rev 5 page 2/43