VNQ600AP-E STMicroelectronics

VNQ600AP-E Quad channel high side driver Datasheet - production data Thermal shutdown Current limitation Very low standby power dissipation Protection against: loss of ground and loss of V CC Reverse battery protection In compliance with the 2002/95/EC european 62 GRXEOH LVODQG directive 36 * 3* Description Features The VNQ600AP-E is a quad HSD formed by assembling two VND600-E chips in the same (1) Type R I V SO-28 package. The VND600-E is a monolithic DS(on) lim CC device designed in STMicroelectronics VIPower VNQ600AP-E 35 m 25 A V 36 M0-3 Technology. The VNQ600AP-E is intended 1. Per each channel for driving any type of multiple loads with one side connected to ground. This device has four independent channels and four analog sense A DC short circuit current: 25 outputs which deliver currents proportional to the CMOS compatible inputs outputs currents. Active current limitation Proportional load current sense combined with thermal shutdown and automatic restart protect the device against overload. Undervoltage and overvoltage shutdown Device automatically turns off in case of ground Overvoltage clamp Table 1. Device summary Order codes Package Tube Tape and reel SO-28 VNQ600AP-E VNQ600APTR-E February 2015 DocID10873 Rev 5 1/27 This is information on a product in full production. www.st.comContents VNQ600AP-E Contents 1 Block diagram and pin description . 5 2 Electrical specifications 7 2.1 Absolute maximum ratings . 7 2.2 Thermal data . 8 2.3 Electrical characteristics . 8 3 Application information . 14 3.1 GND protection network against reverse battery . 14 3.2 Load dump protection 15 3.3 Microcontroller I/O protection 15 3.4 Electrical characteristics curves 17 3.5 Maximum demagnetization energy (VCC = 13.5V) . 19 4 Package and PCB thermal data . 20 4.1 SO-28 thermal data . 20 5 Package information 23 5.1 SO-28 package information . 23 5.2 SO-28 packing information 25 5.3 Revision history 26 2/27 DocID10873 Rev 5