Product Fact Sheet Industrial PCIe BGA SSD (M.2 1620 BGA) EN-26 Series PCIe Gen 3.1, 16x20mm BGA SLC mode Industrial Temperature Grade Date: May 29, 2020 Revision: 1.00 Product Fact Sheet EN-26 Series Product Summary Capacities: 5 GBytes, 10 GBytes, 20 GBytes, 40 GBytes, 80 GBytes Form Factor: PCI Express M.2 BGA (1620) (16mm x 20mm x 1.8mm) Compliance: PCI Express (PCIe) Specification Revision 3.1 Interface: Gen3 x 4 Lanes Command Sets: Supports NVMe 1.3 Performance: o Read Performance: Sequential Read up to 1,600 MBytes/s, Random Read 4K up to 145,000 IOPS o Write Performance: Sequential Write up to 680 MBytes/s, Random Write 4K up to 105,000 IOPS 1 Operating Temperature Range o Industrial: -40 C to 85 C Storage Temperature Range: -40C to 85C Operating Voltage: 3.3, 1.8 and 0.9V supply voltages Low Power Consumption Power: o Power States PS0, PS1, PS2, PS3 and PS4 o Thermal Throttling supported Data Retention: 10 Years Life Begin 1 Year Life End High-Performance Processor with Integrated, Parallel Flash Interface Engines: o Triple-Level Cell (TLC) 3D NAND Flash in pSLC mode o LDPC Code ECC (up to 120bit corrections per 1KByte page) o End-to-end data path protection o Increased Overprovisioning for improved performance and endurance o Page RAID feature Product Features Dynamic and Static Wear Leveling Subpage Mode Flash Translation Layer (FTL) Data Care Management o Active: Adaptive Read Refresh o Passive: Background Media Scan Lifetime Enhancements o Dynamic Bad Block Remapping o Write Amplification Reduction Power Fail Data Loss Protection In-Field Firmware Update Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T.) Swissbit Life Time Monitoring (SBLTM) Tool and SDK for SBLTM AES256 Encryption (on request) Why Swissbit Swissbit is focused on the design, development, manufacture, and support of leading edge memory and storage solutions for the worldwide OEM/ODM marketplace. As a global supplier, Swissbit recognizes and addressees the higher level of application requirements of todays industrial, Netcom, and automotive customers by providing best-in-class products and services, with uncompromised attention to driving overall value and quality. 1 Adequate airflow is required to ensure the drive temperature, as reported in the S.M.A.R.T. data, does not exceed the specified maximum operating temperature. Swissbit AG Revision: 1.00 Industriestrasse 4 Doc-3581 CH-9552 Bronschhofen www.swissbit.com File: EN-26 fact sheet Rev100 Switzerland industrial swissbit.com Page 2 of 2