RHW-34/8-1200/ADH-0

RHW Heat-Shrinkable, Heavy Wall, Polyolefin Tubing W1 W DD d Table 1: Dimensions Minimum Maximum Minimum Nominal Size Expanded Recovered Recovered Recovered I.D. (D) I.D. (d) Jacket Wall Adhesive Wall (W minus W1) (W1) In. mm In. mm in. mm In. mm 12/3 .472 12 .118 3 .079 2.0 .010 .25 16/4 .630 16 .158 4 .095 2.4 .012 .30 24/6 .945 24 .236 6 .106 2.7 .014 .35 28/6 1.102 28 .236 6 .106 2.7 .014 .35 34/8 1.339 34 .315 8 .157 4.0 .014 .35 48/12 1.890 48 .472 12 .177 4.5 .016 .40 56/16 2.205 56 .630 16 .173 4.4 .016 .40 70/20 2.756 70 .787 20 .173 4.4 .016 .40 90/25 3.543 90 .984 25 .169 4.3 .016 .40 110/30 4.331 110 1.181 30 .169 4.3 .018 .45 130/35 5.118 130 1.378 35 .169 4.3 .018 .45 160/50 6.299 169 1.968 50 .169 4.3 .018 .45 180/50 7.087 180 1.968 50 .169 4.3 .020 .50 200/50 7.874 200 1.968 50 .169 4.3 .020 .50 250/65 9.842 250 2.559 65 .169 4.3 .020 .50 320/95 12.598 320 3.740 95 .169 4.3 .024 .60 390/110 15.354 390 4.331 110 .169 4.3 .024 .60 Material: The tubing shall be fabricated from a modified irradiated polyolefin compounded to produce a homogeneous, uniform product whose outside surface is essentially free from flaws, defects, pinholes, seams, cracks, or inclusions. The interior wall is coated with a thermoplastic adhesive. Color: Black Note: Only available with adhesive coating. 2016 Tyco Electronics Corporation. All Rights Reserved Customer Drawing Title: Raychem RHW Tubing Heat-Shrinkable, Heavy Wall, Polyolefin Tubing TE Connectivity reserves the right to amend this Document No : drawing at any time. Users should evaluate the RHW suitability of the product for their application Cage Code: Scale: Size: Rev. Date: Rev.: Sheet: ECO Number: F 06090 None A 6-Nov-16 1 of 2 ECO-16-016154 If this document is printed it becomes uncontrolled. Check for the latest revision. CUSTOMER DRAWING Table 2: Properties Property Unit Requirement Test Method Dimensions Inch (mm) Table 1 ASTM D2671 Tensile Strength psi (MPa) 1750 minimum (12) ASTM D2671 Ultimate Elongation Percent 350 minimum ASTM D2671 Longitudinal Change Percent +5 to -15 maximum ASTM D2671 Specific Gravity 1.2 maximum ASTM D792 Hardness Shore D 40 - 60 ASTM D2240 Low Temperature Flexibility No cracking ASTM D2671 4 hrs -40C Heat Resistance 168 h 150C Percent 350 minimum ASTM D2671 followed by Ultimate Elongation Fungus Growth Rating of 1 or less ASTM G21 ELECTRICAL Dielectric Strength V/mil (kV/cm) 300 minimum (120) ASTM D149 12 Volume Resistivity Ohm-cm 1 X 10 minimum ASTM D257 CHEMICAL Fluid Resistance 168 hrs 23C Immersion in VDE 0370 oil followed by tests for: Tensile Strength psi 1450 minimum (10) ASTM D2671 Ultimate Elongation Percent 300 minimum Corrosive Effect Noncorrosive ASTM D2671, Proc. A 16 hrs 150C Water Absorption Percent 0.50 maximum ASTM D570 24 hrs 23C Rev.: Document No. Sheet: Rev. Date: 6-Nov-16 F 2 of 2 RHW If this document is printed it becomes uncontrolled. Check for the latest revision.