RW- 3044 Page 1 of 7 Date Printed 18-Aug-16 RW-3044 Raychem brand Instalite ZH150 Sleeving SCOPE This Quality Assurance Specification establishes the quality standard for Heat shrinkable Sleeving manufactured from halogen free, light weight, cross-linked, electrically-insulating, flame retarded, flexible material. The dimensions of this sleeving shrinks to a pre- determined size on the application of heat in excess of 175C (347F). Temperature range -75C to 150C Approved Signatories* TE Connectivity Electronics : Approved electronically via DMTec If this document is printed it becomes uncontrolled. Check latest revision in DMTech on the nearest PC (Copies printed on Red Control Paper and issued with transmittal form, are officially controlled copies) RW- 3044 Page 2 of 7 Date Printed 18-Aug-16 1. REVISION HISTORY Revision Number Change Request Date Incorporated By 1 August 2016 Sreeni Kurup 2. REQUIREMENTS 2.1. Composition, Appearance and Colour The sleeving shall be fabricated from irradiated, thermally-stabilised, Halogen free, lightweight compound. It shall be homogeneous and essentially free from flaws, defects, pinholes, bubbles, seams, cracks or inclusions that could affect the performance. The sleeving shall be black, unless otherwise specified. 2.2. Dimensions Dimensions shall be as specified in Table 1 2.3. Test Requirements The sleeving shall meet the requirements specified in Table 2. 3. TEST METHODS 3.1. The test methods shall in accordance with IEC 60684-2, unless otherwise specified. Refer to this specification for details of test conditioning where IEC 60684-3 is specified in IEC 60684-2. 3.2. Preparation of Test Specimens Unless otherwise specified, tests shall be carried out on specimens of sleeving recovered by conditioning in a fan assisted air circulating oven at 200 5C for 4 1 minutes and allowed to cool in air to ambient temperature. No pre-conditioning period is required prior to testing. Unless otherwise specified, all tests shall be made under standard ambient conditions according to IEC Publication 212. In cases of dispute the tests shall be carried out at a temperature of 23 2C and at 50 5% relative humidity. 4. RELATED STANDARDS & issue IEC 60684-2: 2011 Flexible insulating sleeving Part 2: Methods of test IEC 60212: 2010 Standard Conditions for Use Prior to and During Testing of Solid Electrical Insulating Materials Subsequent amendments to, or revisions of, any of the above publications apply to this standard only when incorporated in it by updating or revision. If this document is printed it becomes uncontrolled. Check latest revision in DMTech on the nearest PC (Copies printed on Red Control Paper and issued with transmittal form, are officially controlled copies)