Near Infrared Light Ring Series OPA80 and OPA83 Series Features Designed for Near Infrared wavelength Cameras Daylight Light sensor available Product Photo Here Variety of ring sizes Surface Mount or Through Hole Emitters Description: The OPA80 through OPA83 series are designed to easily illuminate an area with infrared light for a variety of uses including security cameras, spot lighting, etc.. The light ring can be purchased with an ambient light sensing device for minimal current drain during high ambient light conditions. This is great for battery usage and for security cameras during daylight. A choice of through hole and surface mount LED packages, near infrared wavelength and ring sizes are available. Custom mounting, electrical, cabling and connectors are available. Contact your local representative or OPTEK for more information. Applications include: Ordering Information Security camera lighting OPA80 5 Vcc 12 Volts, Light Ring with Daylight Light Sensor Spot lighting OPA81 5 Vcc 12 Volts, Light Ring with NO Daylight Light Sensor Flash lighting OPA82 5 Vcc 5 Volts, Light Ring with Daylight Light Sensor OPA83 5 Vcc 5 Volts, Light Ring with NO Daylight Light Sensor W 5 Y Z Type of Optical component Package = W Z = Meets RoHS requirements Through Hole - 3 mm package T3 Qty of LEDs SM Y = 12 Volt 5 Volt Surface Mount - Ring Size ID & OD A .625 ID & 1.25 OD 12 10 Near IR 850 nm center wavelength = 5 B 1.0 ID & 1.75 OD 18 16 C 1.25 ID & 2.0 OD 18 16 D 1.5 ID & 2.25 OD 24 20 Example: OPA80T35CZ 12 VDC power, Light Ring with Daylight Light Sensor, Through Hole 3mm package, IR - 850 nm center wavelength LED, Ring Size = 1.25 ID & 2.0 OD with 18 LEDs OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. RoHS OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Issue B.1 01/09 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com www.optekinc.com Page 1 of 4 Near Infrared Light Ring Series OPA80 and OPA83 Series Absolute Maximum Ratings (T = 25 C unless otherwise noted) A Storage Temperature -40 C to +100 C Operating Temperature -40 C to +85 C (1) Lead Soldering Temperature (1/16 (1.6mm) from case for 5 seconds with soldering iron) 260 C Reverse Voltage per Emitter 2.0 V Continuous Forward Current 50 mA Peak Forward Current (2 s pulse width, 0.1% duty cycle) 1.0 A Notes: (1) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering. Electrical Characteristics (T = 25 C unless otherwise noted) A SYMBOL PARAMETER MIN TYP MAX UNITS CONDITIONS Forward Voltage (each LED) V F 850 nm LED 1.20 1.35 1.80 Volts I = 20 mA F Viewing Angle (at 50% power points, each component) 3 mmT3 Package 18 Total inclusive angle at 2 lH-H Deg. 50% of maximum Surface MountSM Package 25 optical power. Power Supply Voltage V OPA80, OPA81 11 12 13 Volts I varies with V CC CC CC OPA82, OPA83 4.5 5.0 5.5 OPBA80 & OPBA82 Series OPBA81 & OPBA83 Series OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B.1 01/09 OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Page 2 of 4 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com www.optekinc.com