OPIA500B, OPIA4N35, OPIA4N33 OPIA2110, OPIA2210, OPIA5010, OPIA6010 SMD and SOP Packages 5 Pin Features: 3,750 or 5,000 Vrms electrical isolation Choice of a Single and Dual LED Phototransistor or Photo Darlington Sensor Low-cost plastic Dual-In-Line (DIP) package Agency Approvals: UL Certification No: E58730 VDE No: 40026624,40026625 6 Pin Description: The OPIA series optocouplers are designed for applications that use an analog output (Phototransistor or Photo Darlington) in a dual-in-line package. A wide selection of configurations are available. With typical isolation voltage of 3,750 or 5,000 Volts(RMS), these product meet typical power system isolation requirements. Theory of operation: The LED transmitter is used to illuminate the Photosensor providing electrical isolation between two power systems while maintaining the ability to transmit information from one power system to the other. In many applications, analog signal levels may be required to be transmitted between two power systems while maintaining isolation between the power systems up to 5,000 Volts(RMS). A variety of LED and photosensor configurations are available depending on the system requirements. The ratio Current Transfer Ratio (CTR) is determined using the output current and input current for analog photosensors. CTR ratios can range from as low as 5 to over 9,000 depending on the device. Photosensor Current 20mA CTR = = *100 = 200 LEDCurrent 10mA All SMD product is shipped in tape and reel with TR identified on the end of the part number. Example: OPI4N35ATRE is a 6-Pin SMD shipped in tape and reel (TR) Industrial equipment power isolation Applications: Medical equipment power isolation High voltage isolation Office equipment PCBoard power system isolation OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. RoHS OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Issue A.6 5/10 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com www.optekinc.com Page 1 of 23 OPIA500B, OPIA4N35, OPIA4N33 OPIA2110, OPIA2210, OPIA5010, OPIA6010 SMD and SOP Packages Package Outline Dimensions and Schematics: Top-View Package Style B (SOP) OPIA500 Package Style A (SMD) OPIA60X Pin Part Number 1 2 3 4 5 6 OPIA500 A K E C B OPIA4N35 A K E C B OPIA5010 A K E C B OPIA4N33 A K E C B OPIA2210 A K E C B OPIA6010 A-K K-A E C B OPIA2110 A K E C Symbol Definition Symbol Definition Symbol Definition Symbol Definition Symbol Definition A Anode B Base C Collector E Emitter K Cathode Analog Output Devices Ordering Information Isolation Voltage CTR Typ. Tr / Tf (s) Part Number Package Configuration Max. (Vrms) Min/Typ/Max R = 100 ohms L OPIA500B 3,750 19 / - / 50 LH-HL 0.8 / 0.8 (1.9K) 5-Pin SOP AKKCE OPIA4N35A 5,000 60 / - / 600 5 / 4 6-Pin SMD A KB C E OPIA5010A 5,000 600 / - / 9,000 60 / 50 6-Pin SMD A KB C E (Dar) OPIA4N33A 5,000 500 / 4,000 / - 5 / 60 6-Pin SMD A KB C E (Dar) OPIA2210A 5,000 50 / - / 600 2 / 3 6-Pin SMD A KB C E OPIA6010A 5,000 50 / - / 600 2 / 3 6-Pin SMD A K, K AB C E OPIA2110A 5,000 40 / - / 400 4 / 3 6-Pin SMD A KC E Configuration: Definition of Terms LED IdentificationSensor Identification LED A = Anode K = Cathode Sensor B = Base C = Collector E = Emitter (Dar) = Photo Darlington Packaging Part Number Suffix: TU = Ship in Tubes TR = Tape and Reel Example: OPI4N35ATRE OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.6 5/10 OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Page 2 of 23 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com www.optekinc.com