PC/PCI Bus Specific Prototyping Boards VECTORBORD 4617 IBM AT/ISA 3-Hole Solder Pads (0.28 x 0.080 ) for interconnecting Circuit Pattern: 3-hole Solder Pad multiple component leads Contacts: 98 0.1 Ctrs, 10 x 42 hole grid unrestricted Ni/Gold component placement area Width/Thick: 13.25 /.062 I/O mounting area for 37-pin Height: 4.5 D-subminiature and ribbon cable 16-Pin DIP Capacity: 44 connectors Mounting bracket and hardware Material: FR4 Epoxy Glass kit included (HD36B) V/G Terminals: T44, T46, T49, T68 Layout paper and instructions Socket Pins: R32 included Extender: 3690-26, 3690-26-1 Row and column legends Hole Diameter: .042 provided 4617-1 IBM AT/ISA Circuit Pattern: Peripheral Buses Bus surfaces solder- coated Contacts: 98 0.1 Ctrs, for user convenience Ni/Gold I/O mounting area for 37-pin Width/Thick: 13.25/.062 D-subminiature and ribbon cable connectors Height: 4.5 Mounting bracket and hardware 16-Pin DIP Capacity: 108 kit included (HD36B) Material: FR4 Epoxy Glass Layout paper and instructions V/G Terminals: T44, T46, T49, T68 included Socket Pins: R32 Row and column legends Extender: 3690-26, 3690-26-1 provided Hole Diameter: .042 4617-3 IBM AT/ISA Voltage and ground buses Circuit Pattern: Pad-Per-Hole around board perimeter Contacts: 98 0.1 Ctrs, Pad and bus surfaces solder- coated for user convenience Ni/Gold I/O mounting area for 37-pin Width/Thick: 13.25 /0.62 D-subminiature and ribbon Height: 4.5 cable connectors 16-Pin DIP Capacity: 96 Mounting bracket and hardware Material: FR4 Epoxy Glass kit included (HD36B) V/G Terminals: T44, T46, T49, T68 Layout paper and instructions Socket Pins: R32 included Hole position legend provided, Extender: 3690-26, 3690-26-1 both sides Hole Diameter: .042 Plate thru holes 4617-4 IBM AT/ISA Plane surfaces solder-coated for Circuit Pattern: Voltage/Ground user convenience Planes To simulate plated-thru holes Contacts: 98 0.1 Ctrs, committed to voltage or ground Ni/Gold planes, use Vector T123 eye- Width/Thick: 13.25 /.062 lets, available separately (for use Height: 4.5 without pins) Layout paper and instructions 16-Pin DIP Capacity: 140 included Material: FR4 Epoxy Glass Mounting Bracket and hardware Socket Pins: R50, R51, R52, R53 kit included (HD36B) Extender: 3690-26, 3690-26-1 I/O mounting area for 37-pin Hole Diameter: .055 D-subminiature and ribbon cable connectors Specifications subject to change without notice. ELECTRONIC COMPANY PC/PCI PCMCIA