SMAJ12A Vishay

333 3 SMAJ5.0A thru SMAJ188CA www.vishay.com Vishay General Semiconductor Surface-Mount TRANSZORB Transient Voltage Suppressors FEATURES Available Low profile package Ideal for automated placement Glass passivated chip junction Available in unidirectional and bidirectional 400 W peak pulse power capability with a 10/1000 s waveform, repetitive rate (dut y SMA (DO-214AC) Available cycle): 0.01 % (300 W above 78 V) Cathode Anode Excellent clamping capability Very fast response time (unidirectional) (bidirectional) Low incremental surge resistance Meets MSL level 1, per J-STD-020, LF maximum peak LINKS TO ADDITIONAL RESOURCES of 260 C AEC-Q101 qualified available 3D Models - Automotive ordering code: base P/NHE3 or P/NHM3 Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 PRIMARY CHARACTERISTICS V uni-directional 6.40 V to 231 V MECHANICAL DATA BR V bi-directional 6.40 V to 231 V BR Case: SMA (DO-214AC) V 5.0 V to 188 V Molding compound meets UL 94 V-0 flammability rating WM P 400 W, 300 W Base P/N-E3 - RoHS-compliant, commercial grade PPM Base P/N-M3 - halogen-free, RoHS-compliant, commercial P 3.3 W D grade I 40 A FSM Base P/NHE3 X - RoHS-compliant and AEC-Q101 qualified T max. 150 C J Base P/NHM3 X - halogen-free, RoHS-compliant, and Polarity Unidirectional, bidirectional AEC-Q101 qualified Package SMA (DO-214AC) ( X denotes revision code e.g. A, B, ...) Terminals: matte tin plated leads, solderable per DEVICES FOR BIDIRECTION APPLICATIONS J-STD-002 and JESD 22-B102 E3, M3, HE3, and HM3 suffix meets JESD 201 class 2 For bidirectional use CA suffix (e.g. SMAJ10CA). whisker test Electrical characteristics apply in both directions. Polarity: for unidirectional types the band denotes cathode TYPICAL APPLICATIONS end, no marking on bidirectional types Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive, and telecommunication. MAXIMUM RATINGS (T = 25 C unless otherwise noted) A PARAMETER SYMBOL VALUE UNIT Peak pulse power dissipation with a 10/1000 s waveform (1)(2) (fig. 1) P 400 W PPM Peak pulse current with a waveform (1) I See next table A PPM Power dissipation on infinite heatsink at T = 50 C P 3.3 W A D Peak forward surge current 8.3 ms single half sine-wave unidirectional only (2) I 40 A FSM Operating junction and storage temperature range T , T -55 to +150 C J STG Notes (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 C per fig. 2. Rating is 300 W above 78 V A (2) Mounted on 0.2 x 0.2 (5.0 mm x 5.0 mm) copper pads to each terminal Revision: 30-Jun-2021 Document Number: 88390 1 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DDD D SMAJ5.0A thru SMAJ188CA www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (T = 25 C unless otherwise noted) A BREAKDOWN MAXIMUM MAXIMUM MAXIMUM MAXIMUM DEVICE TEST STAND-OFF VOLTAGE TEMPERATURE REVERSE PEAK PULSE CLAMPING MARKING (1) CURRENT VOLTAGE V AT I BR T DEVICE TYPE LEAKAGE SURGE VOLTAGE AT COEFFICIENT CODE I V (V) T WM AT V CURRENT I WM PPM OF V BR (mA) (V) (3) (2) I (A) I (A) V (V) D PPM C UNI BI MIN. MAX. (%/C) (+) (5) SMAJ5.0A AE WE 6.40 7.07 10 5.0 800 43.5 9.2 0.057 (+) SMAJ6.0A AG WG 6.67 7.37 10 6.0 800 38.8 10.3 0.059 (+) SMAJ6.5A AK WK 7.22 7.98 10 6.5 500 35.7 11.2 0.061 (+) SMAJ7.0A AM WM 7.78 8.60 10 7.0 200 33.3 12.0 0.065 (+) SMAJ7.5A AP WP 8.33 9.21 1.0 7.5 100 31.0 12.9 0.067 (+) SMAJ8.0A AR WR 8.89 9.83 1.0 8.0 50 29.4 13.6 0.069 (+) SMAJ8.5A AT WT 9.44 10.4 1.0 8.5 10 27.8 14.4 0.073 (+) SMAJ9.0A AV WV 10.0 11.1 1.0 9.0 5.0 26.0 15.4 0.074 (+) SMAJ10A AX WX 11.1 12.3 1.0 10 1.0 23.5 17.0 0.078 (+) SMAJ11A AZ WZ 12.2 13.5 1.0 11 1.0 22.0 18.2 0.080 (+) SMAJ12A BE XE 13.3 14.7 1.0 12 1.0 20.1 19.9 0.083 (+) SMAJ13A BG XG 14.4 15.9 1.0 13 1.0 18.6 21.5 0.084 (+) SMAJ14A BK XK 15.6 17.2 1.0 14 1.0 17.2 23.2 0.087 (+) SMAJ15A BM XM 16.7 18.5 1.0 15 1.0 16.4 24.4 0.088 (+) SMAJ16A BP XP 17.8 19.7 1.0 16 1.0 15.4 26.0 0.089 (+) SMAJ17A BR XR 18.9 20.9 1.0 17 1.0 14.5 27.6 0.090 (+) SMAJ18A BT XT 20.0 22.1 1.0 18 1.0 13.7 29.2 0.092 (+) SMAJ20A BV XV 22.2 24.5 1.0 20 1.0 12.3 32.4 0.094 (+) SMAJ22A BX XX 24.4 26.9 1.0 22 1.0 11.3 35.5 0.096 (+) SMAJ24A BZ XZ 26.7 29.5 1.0 24 1.0 10.3 38.9 0.096 (+) SMAJ26A CE YE 28.9 31.9 1.0 26 1.0 9.5 42.1 0.097 (+) SMAJ28A CG YG 31.1 34.4 1.0 28 1.0 8.8 45.4 0.098 (+) SMAJ30A CK YK 33.3 36.8 1.0 30 1.0 8.3 48.4 0.099 (+) SMAJ33A CM YM 36.7 40.6 1.0 33 1.0 7.5 53.3 0.100 (+) SMAJ36A CP YP 40.0 44.2 1.0 36 1.0 6.9 58.1 0.100 (+) SMAJ40A CR YR 44.4 49.1 1.0 40 1.0 6.2 64.5 0.101 (+) SMAJ43A CT YT 47.8 52.8 1.0 43 1.0 5.8 69.4 0.102 (+) SMAJ45A CV YV 50.0 55.3 1.0 45 1.0 5.5 72.7 0.102 (+) SMAJ48A CX YX 53.3 58.9 1.0 48 1.0 5.2 77.4 0.103 (+) SMAJ51A CZ YZ 56.7 62.7 1.0 51 1.0 4.9 82.4 0.104 (+) SMAJ54A RE ZE 60.0 66.3 1.0 54 1.0 4.6 87.1 0.104 (+) SMAJ58A RG ZG 64.4 71.2 1.0 58 1.0 4.3 93.6 0.104 (+) SMAJ60A RK ZK 66.7 73.7 1.0 60 1.0 4.1 96.8 0.105 (+) SMAJ64A RM ZM 71.1 78.6 1.0 64 1.0 3.9 103 0.105 (+) SMAJ70A RP ZP 77.8 86.0 1.0 70 1.0 3.5 113 0.105 (+) SMAJ75A RR ZR 83.3 92.1 1.0 75 1.0 3.3 121 0.106 (+) SMAJ78A RT ZT 86.7 95.8 1.0 78 1.0 3.2 126 0.106 (+) SMAJ85A RV ZV 94.4 104 1.0 85 1.0 2.2 137 0.106 (+) SMAJ90A RX ZX 100 111 1.0 90 1.0 2.1 146 0.106 (+) SMAJ100A RZ ZZ 111 123 1.0 100 1.0 1.9 162 0.107 (+) SMAJ110A SE VE 122 135 1.0 110 1.0 1.7 177 0.107 (+) SMAJ120A VG VG 133 147 1.0 120 1.0 1.6 193 0.108 (+) SMAJ130A VK VK 144 159 1.0 130 1.0 1.4 209 0.108 (+) SMAJ150A VM VM 167 185 1.0 150 1.0 1.2 243 0.108 (+) SMAJ160A SP VP 178 197 1.0 160 1.0 1.2 259 0.108 (+) SMAJ170A SR VR 189 209 1.0 170 1.0 1.09 275 0.108 (+) SMAJ188A SS VS 209 231 1.0 188 1.0 0.91 328 0.108 Notes (1) Pulse test: t 50 ms p (2) Surge current waveform per fig. 3 and derate per fig. 2 (3) For bidirectional types having V of 10 V and less, the I limit is doubled WM D (4) All terms and symbols are consistent with ANSI/IEEE C62.35 (5) For the bi-directional SMAJ5.0CA, the maximum V is 7.25 V BR (6) V = 3.5 V at I = 25 A (unidirectional only) F F (+) Underwriters Laboratory Recognition for the classification of protectors (QVGQ2) under the UL standard for safety 497B and file number E136766 for both unidirectional and bidirectional device Revision: 30-Jun-2021 Document Number: 88390 2 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000