VJ0505D0R4VXPAJ

QUAD HIFREQ Series www.vishay.com Vishay Vitramon Surface Mount Multilayer Ceramic Capacitors for RF Power Applications FEATURES Case size 0505, 1111, 2525, and 3838 Available Ultra-stable, high Q dielectric material Available Lead (Pb)-free terminations code X Tin / lead termination code L Non-magnetic copper termination code C Available Reliable Noble Metal Electrode (NME) system High frequency Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details APPLICATIONS MRI coils and generators RF instruments Lasers, CATV, UHF / microwave RF power amplifiers Filter networks, timing circuits Mixers, oscillators impedance matching networks ELECTRICAL SPECIFICATIONS Note Electrical characteristics at 25 C unless otherwise specified Operating Temperature: Dissipation Factor (DF): full range: -55 C to +125 C C0G (D): 0.05 % max. at 1.0 V and 1 MHz RMS Capacitance Range: for values 1000 pF 0505: 0.1 pF to 1000 pF C0G (D): 0.05 % max. at 1.0 V and 1 kHz RMS 1111: 0.2 pF to 5100 pF for values > 1000 pF 2525: 1.0 pF to 3000 pF Aging Rate: 0 % maximum per decade 3838: 1.0 pF to 12 nF Insulation Resistance (IR): Voltage Rating: at +25 C and rated voltage 100 000 M minimum or 0505: 50 V to 250 V DC DC 1000 F, whichever is less 1111: 50 V to 1500 V DC DC 2525: 300 V to 3600 V DC DC at +125 C and rated voltage 10 000 M minimum or 3838: 300 V to 7200 V DC DC 100 F, whichever is less Temperature Coefficient of Capacitance (TCC): Dielectric Strength Test: performed per method 103 of EIA-198-2-E. C0G (D):0 ppm/C 30 ppm/C from -55 C to +125 C with zero (0) V applied DC Applied test voltages: 250 V -rated: min. 250 % of rated voltage DC 300 V -rated: min. 150 % of rated voltage DC 630 V - to 1000 V -rated: 150 % of rated voltage DC DC 1500 V and up: 120 % rated voltage DC Revision: 15-Nov-2019 Document Number: 45221 1 For technical questions, contact: mlccrf vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 QUAD HIFREQ Series www.vishay.com Vishay Vitramon QUICK REFERENCE DATA MAXIMUM VOLTAGE CAPACITANCE DIELECTRIC CASE (V) MINIMUM MAXIMUM 0505 250 0.1 pF 1000 pF 1111 1500 0.2 pF 5100 pF D = NP0 2525 3600 1.0 pF 3000 pF 3838 7200 1.0 pF 12 nF Note For values below 0.4 pF and tolerance 0.05 pF, contact mlccrf vishay.com Detail ratings see Selection Chart ORDERING INFORMATION VJ0505 D 1R0 B X C A C CASE DIELECTRIC CAPACITANCE CAPACITANCE TERMINATION DC VOLTAGE MARKING PACKAGING CODE NOMINAL CODE TOLERANCE (1) RATING 0505 D = HIFREQ Expressed in V = 0.05 pF C = non-magnetic A = 50 V A = unmarked 1111 picofarads (pF). copper barrier B = 100 V Q = marked B = 0.10 pF 2525 The first two digits 100 % tin plate K = 150 V C = 0.25 pF 3838 are significant, the matte finish C = 200 V D = 0.50 pF T = 7 reel / plastic tape third is a multiplier. X = Ni barrier P = 250 V F = 1 % J = 7 reel (low quantity) An R indicates a 100 % tin plate D = 300 V G = 2 % R = 11 1/4 / 13 reel / decimal point. matte finish E = 500 V J = 5 % plastic tape Examples: L = Ni barrier L = 630 V W = waffle pack K = 10 % 1R0 = 1.0 pF with tin lead I = 800 V M = 20 % plated finish G = 1000 V min. 4 % lead R = 1500 V F = 2000 V Note O = 2500 V Details see H = 3000 V Selection W = 3600 V Chart M = 5000 V S = 7200 V Note (1) DC voltage rating should not be exceeded in application ENVIRONMENTAL STATUS TERMINATION CODE TERMINATION DESCRIPTION RoHS COMPLIANT VISHAY GREEN X Ni barrier 100 % tin plated matte finish Yes Yes L Ni barrier with tin lead plated finish min. 4 % lead No No C Cu barrier 100 % tin plated matte finish (non-magnetic) Yes Yes DIMENSIONS in inches (millimeters) W L T MAX. P TERMINATIONS PAD (P) CASE LENGTH WIDTH MAXIMUM STYLE (1) CODE (L) (W) THICKNESS (T) MINIMUM MAXIMUM 0.055 + 0.015 / - 0.010 0.055 0.015 0.057 0.004 0.016 0505 VJ0505 (1.40 + 0.382 / - 0.254) (1.40 0.38) (1.45) (0.10) (0.41) 0.117 + 0.015 / - 0.010 0.110 + 0.015 / - 0.020 0.102 0.012 0.018 1111 VJ1111 (2.98 + 0.382 / - 0.254) (2.79 + 0.382 / - 0.509) (2.59) (0.30) (0.46) 0.250 + 0.020 / - 0.025 0.250 0.015 0.102 0.010 0.030 2525 VJ2525 (6.35 + 0.508 / - 0.63) (6.35 0.381) (2.59) (0.25) (0.76) 0.381 0.015 0.381 + 0.017 / - 0.015 0.118 0.010 0.030 3838 VJ3838 (9.7 0.40) (9.7 + 0.45 / - 0.40) (3.00) (0.25) (0.76) Note (1) For copper terminations add 0.01 mm to maximum termination pad Revision: 15-Nov-2019 Document Number: 45221 2 For technical questions, contact: mlccrf vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000