Wachendorff Prozesstechnik GmbH & Co. KG Industriestrasse 7 D-65366 Geisenheim Tel.: +49 (0) 67 22 / 99 65 - 20 Fax: +49 (0) 67 22 / 99 65 - 78 www.wachendorff.de Timer TI327401 Excitation: 24 VDC Timer in 32 mm x 74 mm format - 30 mA( 24 VAC power supply) Universal AC/DC power supply - 40 mA(24 VDC power supply) 5 different operation modes - 60 mA(110 bis 230 VAC power supply). 2-line LED display Easy programming by front keys or software Supply: Two relay outputs 24VAC/DC to 230 VAC/DC +/-15 %, 50/60Hz 2 W Data security: Password-protected access to setpoint, alarm values and parameters. Programming: Programming and operation is menu-guided via the front keys. With the programming kit, the controller can also be programmed by a Windows - software. The memory card has an internal battery. Thus, the programming of the devices is possible without the supply (up to 1000 programming with a battery). Wiring plan: TI327401 The compact small timer TI327401 is settable in 5 different modes: Timer-ON, Timer-OFF, Pause-Work, Oscillator, PWM (time- proportioned output), all options with independent setting of ON-OFF times. 3 digital inputs are available (NPN/PNP/Potential free contact) for external commands like Start, Stop, Reset one input is also analogic in order to allow the modification of working times by external potentiometer. Due to the 5 different time bases (hundredths, tenths, seconds, minutes, hours), the timer is usable for a lot of different applications. In addition to an excellent cost effectiveness and high quality, the timer TI327401 offers a rugged, compact housing and a brilliant display. Protection class: IP65 from the front (with rubber sealing), back plane Display: 2-line LED-Display IP20. Upper line: Process value, 4-digit, green with 10.2 mm digits Lower line: Setpoint, 4-digit, red with 7,6 mm digits Housing: Black and robust plastic case, PC ABS UL94V0 self- extinguishing. Indicators: Two red indicators for status relay outputs and a yellow indicator for serial communication. Dimensions: W 77 mm x H 35 mm x D 53 mm. Panel cut out 28,5 mm x 1, 2: ON, when output active 70,5 mm. R: ON when serial communication is active Connection: Via screw terminal. Buttons: 4 front keys for programming and setting up the setpoints. Ambient conditions: Operating temperature: 0 C to +40 C relative Inputs: Three digital inputs can be configured as PNP, NPN or humidity 35 % to 95 %. rF, non condensing. TTL.Programmable thresholds for activation as a high / low active active / rising edge or level triggered. Weight: 100 gramms. Input NPN PNP TTL signal Scope of delivery: Controller, mounting clamp, sealing, manual. Logic level >5,7 V (I1, I2) High < 4,7 V >2,5 V >12,4 v (I3) < 4,7 V (I1, I2) Low > 5,7 V < 2,0 V < 10,2 V (I3) Input I3 can also be used for connection of a potentiometer (0 to 5/10 kOhm) for setting the nominal value (resolution: 1,000 steps). Function of inputs: Start, stop, hold, reset, wait, setpoint input (I3). Order codes Time bases: 5 different programmable time bases (hundredths, Type Order-No. tenths, seconds, minutes, hours). Timer, 230 VAC/VDC TI327401 Relay output: 1 change over relay with 5 A 250 VAC and 1 closing contact with 5A 250 VAC.. Accessories Programming module with USB cable SFUR0KIT Software download under: X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for wachendorff manufacturer: Other Similar products are found below : Wachendorff