General & Thermal High Performance Epoxy BondaTherm Key Features of the BondaTherm Equalizer Kits: Eliminates improper ratios and mixing errors Reduces material waste Eliminates employee contact with resins Eliminates messy hand mixing and transferring Increases productivity Resins are protected from moisture contamination Wakefield Vette Part Number Description Packaging BT-101-50M Non-Sag 5 Minute BondaTherm Epoxy Adhesive 50ml Dual Catridges BT-102-50M Toughened, Flexible Adhesive System 50ml Dual Catridges BT-301-50M Fast Curing Thermally Conductive Adhesive 50ml Dual Catridges BT-301-200M Fast Curing Thermally Conductive Adhesive 200ml Dual Catridges BT-01-50M BondaTherm Equalizer Dispense Gun (50ml) BT-01-200M BondaTherm Equalizer Dispense Gun (200ml) BT-02-50M BondaTherm Equalizer Static Mixer (50ml) BT-02-200M BondaTherm Equalizer Static Mixer (200ml) BT-101-50M-EQZ Two Dual Cartridges (BT-101-50M), One Gun (BT-01-50M), Three Mixers (BT-02-50M) Kit BT-102-50M-EQZ Two Dual Cartridges (BT-102-50M), One Gun (BT-01-50M), Three Mixers (BT-02-50M) Kit BT-301-50M-EQZ Two Dual Cartridges (BT-301-50M), One Gun (BT-01-50M), Three Mixers (BT-02-50M) Kit BT-301-200M-EQZ Two Dual Cartridges (BT-301-200M), One Gun (BT-01-200M), Three Mixers (BT-02-200M) Kit BT-103-50M 5 Minute Clear Bondatherm Epoxy Adhesive 50ml Dual Catridges BT-302-50M Fast Curing Aluminum Filled Bondatherm Epoxy Adhesive 50ml Dual Catridges BT-401-H Silver Filled Bondatherm 2 gram Epoxy Hinge Packs 2 gram hinge pack BT-402-H Thermally Conductive Epoxy Potting UL Listed 100 gram Bondatherm Hinge Pack 100 gram hinge pack BT-403-H Aluminum Filled Bondatherm Epoxy Adhesive for Heat Sinks 100 gram Hinge Pack 100 gram hinge pack www.wakefield-vette.comGeneral & Thermal High Performance Epoxy Bondatherm Cartridges BT-101-50M This high bond strength adhesive is a clear 100% solids, two component, non-sag adhesive with a quick setting time of 5 minutes at room temperature. It is excellent for bonding plated metals, pewter, glass, wood, ceramic, felt, cement, gem stones, most plastics and rubbers, etc... DESCRIPTION: These high bond strength adhesives are clear 100% solids, two component, non-sag adhesives with a quick setting time of 5-46 minutes at room temperature. They are excellent for bonding plated metals, pewter, glass, wood, ceramic, felt, cement, gem stones, most plastics and rubbers, etc... These adhesives were tested in our laboratory for flame retardancy properties. According to our test results they meet the requirements of UL94HB. APPLICATIONS: These unique adhesives are ideally suited for a wide range of electronic, electrical, industrial, structural, and jewelry applications. These adhesives are also an excellent choice for field repairs. They are offered in the popular BondaTherm Equalizer Kit dual barrel cartridge dispensing system and bulk packaging. FEATURES: Non-sag consistency High bond strength Fast room temperature cure three speeds to choose from Water & chemical resistance Outstanding thermal shock resistance 1:1 mix ratio Impact resistance SPECIFICATIONS: Color Semi-transparent (available in black) Mix ratio by volume 1:1 Mixed viscosity, 25C cps* Non-Sag Solids content, % 100 Specific gravity, 25C 1.15 Shore D hardness 10-3005NS 86 10-3020NS 72 10-3046NS 65 Work Life, 25C, minutes 10-3005NS 3-5 10-3020NS 10-15 10-3046NS 25-30 Handling time, 25C, minutes 10-3005NS 15-20 10-3020NS 30-35 10-3046NS 55-60 Cure time, 25C, hours 24-48 www.wakefield-vette.com