WR01X2492FDL Walsin

Approval sheet WR01X 5%, 1% Thick Film General Purpose chip resistors Size 01005 *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC WR01X V06 JAN - 2017 Approval sheet FEATURE 1. Ultra small and high precision size and light weight 2. High reliability and stability 3. Reduced size of final equipment 4. Suitable for high density print circuit board assembly 5. Higher component and equipment reliability 6. Lead free product APPLICATION Mobile phone PDA, MP3, Ipod, iPHONE DSC, DVs Palmtop computers Mini module DESCRIPTION The resistors are constructed in a high grade ceramic body (aluminum oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface of the substrate. The composition of the paste is adjusted to give the approximate resistance required and the value is trimmed to nominated value within tolerance which controlled by laser trimming of this resistive layer. The resistive layer is covered with a protective coat. Finally, the two external end terminations are added. For ease of soldering the outer layer of these end terminations is a pure Tin. Fig 1. Construction of Chip-R WR01X Page 2 of 8 ASC WR01X V06 JAN - 2017