Data sheet Weidmller Interface GmbH & Co. KG MAK 2.5 DB Klingenbergstrae 26 D-32758 Detmold Germany www.weidmueller.com Product image Our motor connection terminals offer the possibility of convenient wiring of all 3 phases including protective conductor on only one terminal block. General ordering data Version W-Series, Motor-connection terminal, Rated cross-section: 2.5 mm, Screw connection, Direct mounting Order No. 7917030000 Type MAK 2.5 DB GTIN (EAN) 4032248190928 Qty. 50 pc(s). Creation date March 26, 2022 4:38:32 AM CET Catalogue status 11.03.2022 / We reserve the right to make technical changes. 1Data sheet Weidmller Interface GmbH & Co. KG MAK 2.5 DB Klingenbergstrae 26 D-32758 Detmold Germany www.weidmueller.com Technical data Dimensions and weights Depth 63 mm Depth (inches) 2.48 inch Depth including DIN rail 64 mm Height 88 mm Height (inches) 3.465 inch Width 6.2 mm Width (inches) 0.244 inch Net weight 23.24 g Temperatures Storage temperature -25 C...55 C Continuous operating temp., min. -50 C Continuous operating temp., max. 120 Material data Material Wemid Colour dark beige UL 94 flammability rating V-0 System specifications Version Screw connection, With End cover plate required PE connection, One end without connector Yes Number of potentials 4 Number of levels 4 Number of clamping points per level 2 Number of potentials per tier 1 Levels cross-connected internally No PE connection Yes Rail TS 35 N-function No PE function Yes PEN function No Additional technical data Explosion-tested version No Installation advice Direct mounting Open sides right Type of mounting Snap-on CSA rating data Certificate No. (CSA) 12400-320 Current size B (CSA) 10 A Current size C (CSA) 10 A Current size D (CSA) 10 A Voltage size B (CSA) 300 V Voltage size C (CSA) 300 V Voltage size D (CSA) 300 V Wire cross section max. (CSA) 12 AWG Wire cross section min. (CSA) 26 AWG Conductors for clamping (rated connection) Blade size 0.6 x 3.5 mm Creation date March 26, 2022 4:38:32 AM CET Catalogue status 11.03.2022 / We reserve the right to make technical changes. 2