SE025M0470A5S-1012 Yageo

F0.5 F0.5 YAGEO CORPORATION ElEcTR olyTIc c ApAcIT oRs Miniature Aluminum Electrolytic capacitors sE-K f or General 105c single-Ended lead Aluminum Electrolytic capacitors Rated Voltage up to 450V ELECTRICAL CHARACTERISTICS Operating Temperature Range : -40 ~ +105C / -40 ~ +105C / 25 ~ +105C Rated Voltage Range : 6.3 ~ 100V / 160 ~ 250V / 350 ~ 450V Rated Capacitance Range : 0.47 ~ 15000F / 0.47 ~ 470F / 0.47 ~ 150F Capacitance Tolerance : -20 ~ +20% at 120Hz, 20C Leakage Current (A) : I = 0.01CV (A) + 3A / 0.03CV (A) + 10A Whichever is greater. DESCRIPTIOn (After Rated Voltage Applied for 2 Minutes) Lower-cost capacitors expressly intended for high Dissipation Factor density printed circuit board. W V (V) : 6.3 10 16 25 35 50 63~100 160 ~ 250 350 ~ 450 Very High Volumetric Efficiency. D.F. (%) : 26 22 18 16 14 12 10 15 20 Ideally suited for general-purpose applications, coupling, Endurance : After applying rated voltage for 1000 hours at 105C. The capacitors shall meet the decoupling, by pass, and lfi tering circuit in entertainment electronics. following requirements. (a) Capacitance Change : Within 20% of Initial Value Feature High CV Product with Moderate Cost. (b) Dissipation Factor : 200% or Less of Initial Specified Value (c) Leakage Current : Initial Specified Value or Less muLTIPLIER FOR RIPPLE CuRREnT Frequency Coefficient Shelf Life : After leaving capacitors under no load at 105C for 500 hours, the capacitors shall meet FREQuEnCY (Hz) 120 300 1K 10K~100K the same requirement as Endurance. 6.3~100V Below~68F 1.00 1.20 1.30 1.45 6.3~100V 100~680F 1.00 1.10 1.15 1.25 6.3~110V 1000~22000F 1.00 1.05 1.10 1.15 160~450V ALL Cap(F) 1.00 1.05 1.10 1.50 DIAGRAm OF DImEnSIOnS Dimensions: mm Rubber stand-off D F d 5.0 2.0 0.5 6.3 2.5 Rubber End Seal Rubber End Seal Vinyl Sleeve Vinyl Sleeve (P.V.C) (P.V.C) 8.0 3.5 0.6 10.0 5.0 12.0 0.4Max. 13.0 L 15Min. 5Min. D0.5 L 15Min. 5Min. D0.5 16.0 7.5 0.8 < l 16 l + 1.5Max. D 20 D + 0.5 18.0 > l 16 l + 2Max. D 20 D + 1 D = 8 & 10 l + 2.5Max. 22.0 10.0 0.8 (1.0)36 CASE SIZE & PERmISSIBLE RIPPLE CuRREnT OF STAnDARD PRODuCTS D x L: mm CAP. (F) RATED VOLTAGE W V (SuRGE VOLTAGE W V) 6.3 (8) 10 (13) 16 (20) 25 (32) 35 (44) 50 (63) 63 (79) SIZE RIPPLE SIZE RIPPLE SIZE RIPPLE SIZE RIPPLE SIZE RIPPLE SIZE RIPPLE SIZE RIPPLE 0.47 5 x 11 7 5 x 11 8 0.68 5 x 11 7 1.0 5 x 11 12 5 x 11 13 2.2 5 x 11 18 5 x 11 20 3.3 5 x 11 25 5 x 11 27 4.7 5 x 11 20 5 x 11 25 5 x 11 30 5 x 11 34 6.8 5 x 11 25 5 x 11 30 5 x 11 32 5 x 11 37 10 5 x 11 25 5 x 11 30 5 x 11 40 5 x 11 50 5 x 11 55 15 5 x 11 40 5 x 11 45 5 x 11 50 5 x 11 60 5 x 11 65 22 5 x 11 45 5 x 11 55 5 x 11 60 5 x 11 65 5 x 11 75 5 x 11 75 6.3 x 11 90 33 5 x 11 60 5 x 11 70 5 x 11 75 5 x 11 85 6.3 x 11 105 6.3 x 11 110 8 x 11 120 47 5 x 11 60 5 x 11 75 5 x 11 85 5 x 11 90 5 x 11 95 6.3 x 11 100 6.3 x 11 128 6.3 x 11 97 6.3 x 11 115 8 x 11 125 8 x 11 155 68 5 x 11 75 5 x 11 80 5 x 11 100 6.3 x 11 125 8 x 11 130 8 x 11 159 10 x 12 198 100 5 x 11 100 5 x 11 110 5 x 11 110 6.3 x 11 145 6.3 x 11 150 8 x 11 160 8 x 15 230 6.3 x 11 135 6.3 x 11 135 8 x 11 160 8 x 11 190 10 x 12 210 10 x 12 260 150 5 x 11 120 5 x 11 110 8 x 11 180 8 x 11 200 10 x 12 240 10 x 12 289 10 x 15 330 6.3 x 11 130 220 5 x 11 140 5 x 11 150 6.3 x 11 180 8 x 11 200 8 x 11 230 10 x 12 340 10 x 15 400 6.3 x 11 165 6.3 x 11 180 8 x 11 235 10 x 12 250 8 x 15 280 10 x 15 400 10 x 19.5 460 10 x 12 315 270 8 x 11 210 330 6.3 x 11 160 6.3 x 11 205 8 x 11 285 8 x 11 265 8 x 15 345 10 x 15 450 10 x 19.5 520 8 x 11 200 8 x 11 255 8 x 15 320 8 x 20 420 10 x 19.5 535 13 x 20 650 10 x 12 355 10 x 12 380 10 x 15 440 470 6.3 x 11 220 6.3 x 11 245 8 x 11 310 8 x 15 365 10 x 15 415 10 x 19.5 580 13 x 20 700 8 x 11 280 8 x 11 305 8 x 15 360 10 x 12 400 10 x 19.5 490 13 x 20 730 13 x 25 800 10 x 12 395 10 x 15 470 13 x 20 580 560 10 x 30 600 Note: 1. Ripple Current: (mA/rms) 105C, 120Hz