Ships to you by Tue. 30 Apr
DS1812-10+T&R Analog Devices
- HMC272AMS8E Mixer 1.7GHz ~ 3GHz Evaluation Board Stock : 0
Analog Devices Hittite RF Development Tools Eval PCB Stock : 0
Analog Devices Hittite Clock & Timer Development Tools Eval PCB Stock : 0
RF Development Tools HMC493LP3 Evaluation PCB Stock : 0
Sub-GHz Development Tools HMC454ST89 Evaluation PCB, 900 MHz Stock : 0
RF Development Tools HMC591LP5 Evaluation PCB Stock : 0
RF Development Tools HMC443LP4 Evaluation PCB Stock : 0
RF Development Tools HMC550A EVALUATION PCB ASSEMBLY Stock : 0
Supervisory Circuits 3P Supply Vltg Super Stock : 1200
Supervisory Circuits w/5K Pull-Up Low Stock : 2
Supervisory Circuits RESET DETEC VOLT 2.4V Stock : 0
Supervisory Circuits LOW VOLT DETECT VOLT 2.9V Stock : 2900
Supervisory Circuits LOW VOLT DETECT VOLT 2.8V Stock : 947
Supervisory Circuits 4.37VRST Active Low Open Drain reset Stock : 4
Supervisory Circuits Low Voltage Detector Stock : 1
Supervisory Circuits 3.5V 1.3uA CMOS Out Stock : 1143
Processor Supervisor 1.8V 1 Active Low/CMOS 4-Pin(3+Tab) SOT-89 Stock : 1
PMIC - Supervisors SOT23-3 RoHS Stock : 0
DS1812 5V EconoReset with Active High Push-Pull Output www.maxim-ic.com FEATURES PIN ASSIGNMENT Automatically restarts a microprocessor after 3 power failure DALLAS DS1812 Maintains reset for 150 ms after V returns CC Econo Reset to an in-tolerance condition Reduces need for discrete components Precision temperature-compensated voltage 12 reference and voltage sensor TOP VIEW SOT-23 PACKAGE Low-cost TO-92, or space saving surface See Mech. Drawings Section mount SOT-23 packages available On Website 1 2 3 Push-pull active high output Operating temperature -40 C to +85 C 1 2 3 BOTTOM VIEW TO-92 PACKAGE See Mech. Drawings Section On Website PIN DESCRIPTION TO-92 1 RST Active High Reset Output 2 V Power Supply CC 3 GND Ground SOT-23 1 RST Active High Reset Output 2 V Power Supply CC 3 GND Ground DESCRIPTION The DS1812 EconoReset uses a precision temperature reference and comparator circuit to monitor the status of the power supply (V ). When an out-of-tolerance condition is detected, an internal power-fail CC signal is generated which forces reset to the active state. When V returns to an in-tolerance condition, CC the reset signal is kept in the active state for approximately 150 ms to allow the power supply and processor to stabilize. 1 of 5 041002DS1812 OPERATION - POWER MONITOR The DS1812 provides the function of detecting out-of-tolerance power supply conditions and warning a processor-based system of impending power failure. When V is detected as out-of-tolerance, the RST CC signal is asserted. On power-up, RST is kept active for approximately 150 ms after the power supply has reached the selected tolerance. This allows the power supply and microprocessor to stabilize before RST is released. BLOCK DIAGRAM (CMOS OUTPUT) Figure 1 APPLICATION EXAMPLE Figure 2 2 of 5
