A01 SERIES INDUSTRIAL CONTROLS Installation - tools Modular construction / panel mounting PANEL CUT-OUT PUSHBUTTONS & INDICATORS Round & square operators only SCREEN 16.00 0.00/+0.30 LEGEND .000/+.011 EMERGENCY ROTARY KEYLOCK (.629 DIA ) STOP LEVER SWITCHES SWITCHES REFLECTOR LOCATING SLOT BULB POLARISING 1.50 DOT (.059) PANEL SEAL Rectangular operators only FIXING NUT 16.00 0.00/+0.30 .000/+.011 (.629 DIA ) OPERATOR 2.00 (.078 DIA) LATCH 10.50 SWITCH BLOCK (.413) Max. panel thickness : 8 mm (.315) PANEL MOUNTING ASSEMBLY TO REMOVE BULB Drill/punch hole shaped as above. Remove reflector/screen assembly. Use the bulb extractor 30-002 to remove the bulb. Assemble front operator through hole, fit fixing nut and tighten to a maximum torque of 0,8Nm using tool No 30-0001. SWITCH BLOCK Wire chosen switch block as required and slide onto To assemble switch block to front operator, TAKE CARE operator until latch engages. TO LINE UP SWITCH BLOCK WITH FRONT OPERATOR. Fit bulb if required using tool No 30-0002. Once in position, slide on to front operator. NB. : Ensure latch is fully engaged correctly onto the switch block. Snap screen onto reflector assembly with legend in between if required and snap onto front operator TAKING To remove switch block, depress the latch and slide the CARE TO LINE UP THE LOCATING SLOT WITH THE switch block off the operator. POLARISING DOT, and not to damage the seal. FIXING NUT KEY BULB REMOVER L 30-0001 30-0002 L-14 APEM 4.00 Maxi (.157 MAX) 7.25 (.285)X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for apem manufacturer: Other Similar products are found below : 48 TW11GRY1 SLB13814 SLC120025 DA04T Q6F1CXXB24 SLG12004 SLB1281R5 DPL-02 DA08 5D15F1534 M11L0A1M M11L0B1M M21L0E1C M31L0M1M CW-A0BK1A00A0 MAB6B A019101 A019305 A019409 A029301 A1PCA0X106J103 Q16F1BXXR12E Q22F1BXXY12E Q22F1CXXB24E Q22F1CXXG12E Q8P1BXXY110E Q8P3BXXG12E Q8P7BZZRYG12E Q8R3BXXG02E 121442RA HF-33S10 HF44R11 HF45R10 HFX44S00 DMR10 DSR04T AV0830C900 AV19810KMZB MSS22 BD150A01RE0000 BD150D02BK1200 HS1T24GA 1D09034 1Z03 1ZZ NZAA0477 NZAA1475 NZAB1475 NZAB1477