HR series Proportional Hall effect thumbwheels Distinctive features and specifications 5 million lifecycles (without detent) Sealed to IP68 Backlighting option EMI/RFI shielding Detent options available Patented solution MECHANICAL ENVIRONMENTAL Operating Force at center: Operating Temperature: -30C to +70C (-22F to +158F) Storage Temperature: -40C to +85C (-40F to +185F) 2N0.5N (without center detent) Sealing to IP68 4N0.5N (with center detent) Shock resistance: 50g during 11ms Return spring to center Vibration resistance: 10-500Hz Mechanical operating angle: Salt spray: IEC 512-6, test 11f 35 (versions S/G/L) EMI/RF shielding: 100V/m, complies with IEC 61000- 20 (version K) 4-3 and ISO 11452-2 Mechanical Life: 5 million cycles (without detent) ESD: Complies with 16KV EN 61000-4-2 APEM SAS patented design ELECTRICAL MATERIALS Wheel: polyamide with coloring Sensor type: Hall effect Support: polyamide, black Supply voltage: 5VDC 0.5V Electronics sealing: epoxy Reverse polarity: -10V max Connector: polyester (Molex 0510210700) Overvoltage: +20V max Multiwire lead: AWG28 Return to center voltage (no load): 0.2V Consumption: 11 mA max (single output), 22mA max (dual output) LED supply: 6VDC 10mA NOTES: Mounting accessories. Standard hardware includes: 2 self-tapping screws DELTA PT 22x08 for plastic Notice: Not all part number combinations may be available. Please refer to the following pages for further information. Packaging: Product is available as 20 pieces per package. Tolerance: General tolerance for dimensions is 0.3 (.012). Dimensions: First dimensions listed are in mm while inches are shown in brackets. Note: The company reserves the right to change specifications without notice. APEM www.apem.comHR series Proportional Hall effect thumbwheels Actuator options and dimensions HR Actuator SERIES Backlighting Output Options S Wheel with 1 tab A Single 0V to 5V 1 Yes G Reversed wheel B Single 0.5V to 4.5V 0 No with 1 tab C Dual 0V to 5V K Wheel with 2 tabs D Dual 0.5V to 4.5V Wheel colors L Wheel without tab E Inverse dual 0.5V to 4.5V 1 Blue F Inverse dual 0V to 5V B Dark blue Mounting Options 2 Black Mechanical functions 3 Green 2 Rear 5 Yellow 0 Spring to center, without 6 Red center detent 7 White 1 Spring to center, with Other detent options available upon request. 9 Orange center detent Wheel with 1 tab - (options S & G) Wheel with 2 tabs - (option K) Wheel without tab - (option L) NOTE: Dimensions are in mm/(inch). Note: The company reserves the right to change specifications without notice. www.apem.com APEM