10A1

1. Power Diode: A power diode is a device that comes in both standard and high-frequency application and is used to regulate the flow of electrical current and to protect electrical circuits from damage. 2. Schottky Diode: A Schottky diode is a semiconductor device consisting of two electrodes that are separated by a small amount of semiconductor material. It is used to limit the flow of current in one direction. 3. SCR: An SCR or silicon controlled rectifier is a three terminal solid-state device that can control current in either direction. SCRs are used for resetting or bypassing circuits or for controlling the speed of motors. 4. Zener Diode: A Zener diode is a two terminal semiconductor device that is used for voltage regulation. It can pass current in either direction and maintains a fixed voltage across the two terminals. 5. Transistor: A transistor is a three terminal semiconductor device that can control current and regulate power flows. Transistors are used in computers, amplifiers, and switching circuits. 6. Triac: A triac is a three terminal solid state device that can be used to control the current through two separate channels. It is used in circuits that require complicated switching, such as dimmer switches, temperature control circuits, and motor speed control circuits. 7. Resistor: A resistor is a two terminal device used to regulate current and assist with the function of other components. There are several types of resistors, including fixed resistors and variable resistors. 8. Relay: A relay is an electrical device that can be used to control the flow of current within a circuit. Relays are used to remotely control and monitor circuits from a distance. 9. Fuse: A fuse is a one-time use device that is used to protect electrical circuits from overloads and short circuits. When current reaches a certain level, the fuse will “blow” or break, disconnecting the circuit. 10. Inductor: An inductor is an electrical component that can store energy in the form of an electromagnetic field. It is often used in circuits to filter out high frequency signals and to create power for other circuits.