B170BQ - B1100BQ Green 1.0A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER Product Summary ( +25C) Features and Benefits B170BQ Guard Ring Die Construction for Transient Protection VRRM (V) IO (A) VF max (V) IR max (mA) Ideally Suited for Automated Assembly 70 1.0 0.79 0.5 Low Power Loss, High Efficiency For Use in Low Voltage Drop, High Frequency Inverters, Free B180BQ Wheeling, and Polarity Protection Application V (V) I (A) V max (V) I (mA) RRM O F R max High Temperature Soldering: +260C/10 Second at Terminal 80 1.0 0.79 0.5 Lead-Free Finish RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note 3) B190BQ The B170BQ - B1100BQ are suitable for automotive VRRM (V) IO (A) VF max (V) IR max (mA) applications requiring specific change control these parts 90 1.0 0.79 0.5 are AEC-Q101 qualified, PPAP capable, and manufactured in IATF 16949 certified facilities. B1100BQ B170BQ - B1100BQ Maximum Ratings ( T = +25C, unless otherwise specified.) A Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol B170BQ B180BQ B190BQ B1100BQ Unit Peak Repetitive Reverse Voltage VRRM Working Peak Reverse Voltage VRWM 70 80 90 100 V DC Blocking Voltage V R RMS Reverse Voltage V 49 56 63 70 V R(RMS) 1.0 A Average Rectified Output Current TT = +125C IO Non-Repetitive Peak Forward Surge Current 8.3ms 30 A IFSM Single Half Sine-Wave Superimposed on Rated Load Repetitive Peak Reverse Current 1.0 A IRRM Thermal Characteristics Characteristic Symbol B170BQ B180BQ B190BQ B1100BQ Unit Typical Thermal Resistance Junction to Terminal (Note 5) 25 C/W RJT Operating and Storage Temperature Range -65 to +150 TJ, TSTG C Electrical Characteristics ( TA = +25C, unless otherwise specified.) Characteristic Symbol Min Typ Max Unit Test Condition I = 1.0A, T = +25C 0.79 F A Forward Voltage Drop V VF 0.69 IF = 1.0A, TA = +100C 0.5 Rated VR, TA = +25C Leakage Current (Note 6) I mA R 5.0 Rated V , T = +100C R A Total Capacitance C 80 pF V = 4V, f = 1MHz T R Notes: 5. Valid provided that terminals are kept at ambient temperature. 6. Short duration pulse test used to minimize self-heating effect. 2 of 5 B170BQ - B1100BQ September 2020 Diodes Incorporated www.diodes.com Document number: DS38540 Rev.4 - 2